Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM › from 2015.10
RM3090E _54 Brake _008767 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0048751 VEHICLE STABILITY CONTROL SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM  C1201  Engine Control System Malfunction  


DESCRIPTION

If a malfunction in the engine control system is detected, the operation of VSC and TRC/TRAC is prohibited by the fail-safe function.

When the signals from the engine are input normally, the fail-safe control is canceled and the DTC is not stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1201 Engine Control System Malfunction Engine control system malfunction signal continues for 1 second or more. Engine control system

PROCEDURE

1.CHECK ENGINE CONTROL SYSTEM
a.

for 2AD-FHV or 2AD-FTV

Check if an engine control system DTC is output.

for 2AD-FHV: Click hereEngine / Hybrid System>2AD-FHV ENGINE CONTROL>ECD SYSTEM>DTC CHECK / CLEAR

for 2AD-FTV (for CCo): Click hereEngine / Hybrid System>2AD-FTV ENGINE CONTROL>ECD SYSTEM(for CCo)>DTC CHECK / CLEAR

for 2AD-FTV (for DPF): Click hereEngine / Hybrid System>2AD-FTV ENGINE CONTROL>ECD SYSTEM(for DPF)>DTC CHECK / CLEAR

Powertrain > Engine and ECT > Trouble Codes
50001 234

b.

for 2WW

Check if an engine control system DTC is output.

Click hereEngine / Hybrid System>2WW ENGINE CONTROL>ECD SYSTEM>DTC CHECK / CLEAR

Powertrain > Engine and ECT > Trouble Codes
50001 371

Result:
Proceed to
DTC is not output (for 2AD-FHV)
DTC is not output (for 2AD-FTV)
DTC is not output (for 2WW)
DTC is output (for 2AD-FHV)
DTC is output (for 2AD-FTV (for CCo))
DTC is output (for 2AD-FTV (for DPF))
DTC is output (for 2WW)



DTC is not output (for 2AD-FHV)

DTC is not output (for 2AD-FTV)

DTC is not output (for 2WW)

GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

DTC is output (for 2AD-FHV)

GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

DTC is output (for 2AD-FTV (for CCo))

GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

DTC is output (for 2AD-FTV (for DPF))

GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)

DTC is output (for 2WW)

GO TO ENGINE CONTROL SYSTEM (DIAGNOSTIC TROUBLE CODE CHART)