Home › Audio / Visual / Telematics › AUDIO / VIDEO › DIGITAL AUDIO BROADCASTING ANTENNA › from 2015.10
RM3090E _56 Audio / Visual / Telematics _008775 AUDIO / VIDEO _0227592 DIGITAL AUDIO BROADCASTING ANTENNA A

AUDIO / VIDEO  DIGITAL AUDIO BROADCASTING ANTENNA  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 63310 3.REMOVE ROOF HEADLINING ASSEMBLY

Hide 86101Q 4.REMOVE NO. 4 ANTENNA CORD SUB-ASSEMBLY

a.
E336751

Detach the clamp.


b.

Remove the nut and No. 4 antenna cord sub-assembly.