Home › Drivetrain › CLUTCH › CLUTCH ACCUMULATOR(for Gasoline) › 2015.10–2016.08
RM3090E _52 Drivetrain _008754 CLUTCH _0050761 CLUTCH ACCUMULATOR(for Gasoline) A

CLUTCH  CLUTCH ACCUMULATOR(for Gasoline)  INSTALLATION  


PROCEDURE

Hide 31490 1.INSTALL CLUTCH ACCUMULATOR ASSEMBLY

a.

Temporarily install the clutch accumulator assembly to the manual transaxle assembly with the 3 bolts.


b.
C298599N01
1.354,1.427 1.51,1.625 0.156,0.198 10 false 1 1.344,0.542 1.5,0.74 0.156,0.198 10 false 2 2.802,0.542 2.958,0.74 0.156,0.198 10 false 3

Tighten the 3 bolts in the order shown in the illustration.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


c.
C280409C01
2.229,0.208 1.979,0.208 1.979,0.208 1.729,0.427 true 0.406,1.635 0.563,1.833 0.156,0.198 10 A 2.292,0.135 2.51,0.385 0.219,0.25 10 *a 2.635,2.042 2.792,2.24 0.156,0.198 10 A 2.635,2.469 2.792,2.667 0.156,0.198 10 B
*a Paint Mark


Temporarily install the bleeder to accumulator tube labeled A and accumulator to flexible hose tube labeled B.


d.

Install the clamp with the bolt.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)

HINT:

Align the clamp and paint mark as shown in the illustration and install the clamp.



e.

Using a 10 mm union nut wrench, tighten the bleeder to accumulator tube labeled A and accumulator to flexible hose tube labeled B.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).



f.

Connect the accumulator to flexible hose tube and clutch hose.


g.
C277990N01
2.688,1.823 2.844,2.021 0.156,0.198 10 A 1.771,1.948 1.927,2.146 0.156,0.198 10 B

Install the clutch hose with a new clip labeled A.


h.

Using a 10 mm union nut wrench, tighten the accumulator to flexible hose tube labeled B.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).



Hide 4.INSPECT FOR FLUID LEAK

HINT:

Check for leaks in the clutch system.


Hide 51444C 6.INSTALL REAR ENGINE UNDER COVER LH

Hide 51441 7.INSTALL NO. 1 ENGINE UNDER COVER