Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH › from 2015.10
RM3090E _59 Vehicle Exterior _008794 DOOR / HATCH _0049520 BACK DOOR OPENER SWITCH A

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

A bolt without a torque specification is shown in the standard bolt chart.

Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS


PROCEDURE

Hide 84840G 1.INSTALL BACK DOOR OPENER SWITCH ASSEMBLY

a.

Install the back door opener switch.

HINT:

Make sure the arrows on the back door opener switch and the back door garnish are pointing in the same direction.



Hide 76801 2.INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

Hide 3.INSTALL REAR LIGHT ASSEMBLY LH

Hide 4.INSTALL REAR LIGHT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 84280D 5.INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

Hide 84270G 6.INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

HINT:

Use the same procedure as for the LH side.


Hide 67750 7.INSTALL BACK DOOR TRIM BOARD ASSEMBLY

Hide 67938A 8.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 9.INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.


Hide 67939B 10.INSTALL BACK DOOR CENTER GARNISH