Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › from 2016.08
RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050105 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REASSEMBLY  


PROCEDURE

Hide 52169C 1.INSTALL REAR BUMPER LOWER COVER

a.

Attach the 14 claws and 3 guides to install the rear bumper lower cover.


b.

Install the 4 clips.


Hide 52162H 2.INSTALL REAR BUMPER SIDE EXTENSION LH

a.

Install the rear bumper side extension LH with the 2 clips.


Hide 52161E 3.INSTALL REAR BUMPER SIDE EXTENSION RH

HINT:

Use the same procedure described for the LH side.


Hide 52453 4.INSTALL REAR BUMPER CENTER GUARD

a.

Attach the 4 claws to install the rear bumper center guard.


b.

Install the 8 clips.


Hide 82182 5.INSTALL NO. 2 LUGGAGE ROOM WIRE

a.

Attach the 6 clamps to install the No. 2 luggage room wire.


Hide 891B2 6.INSTALL KICK DOOR CONTROL SENSOR (w/ Touchless Power Back Door)

Hide 7.INSTALL BACK-UP LIGHT ASSEMBLY LH

Hide 8.INSTALL BACK-UP LIGHT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 89341B 9.INSTALL NO. 2 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

Hide 89348D 10.INSTALL ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)