1.CONNECT CLUTCH PEDAL BRACKET SUB-ASSEMBLY
Connect the clutch pedal bracket sub-assembly to the clutch pedal support sub-assembly.
31321
2.INSTALL CLUTCH PEDAL PAD
Install the clutch pedal pad to the clutch pedal sub-assembly
31301P
3.INSTALL CLUTCH PEDAL TURNOVER BUSH
|
MP Grease |
Apply MP grease to the contact surface of the clutch pedal turnover bush.
Install the clutch pedal turnover bush.
31324A
4.INSTALL CLUTCH PEDAL SHAFT COLLAR
|
MP Grease |
Apply MP grease to both sides of a clutch pedal shaft collar and 2 new bushes.
Install the clutch pedal shaft collar.
Install the 2 bushes.
31353
5.INSTALL CLUTCH PEDAL SPRING HOLDER
|
MP Grease |
Apply MP grease to the contact surface of the clutch pedal spring holder.
Install the clutch pedal spring holder.
31301
6.INSTALL CLUTCH PEDAL SUB-ASSEMBLY
Install the clutch pedal sub-assembly to the clutch pedal support sub-assembly with the bolt and nut.
Install the bolt from the right side of the vehicle.
31301A
7.INSTALL CLUTCH PEDAL SPRING
|
MP Grease |
Apply MP grease to the contact surface of the clutch pedal spring.
Install the clutch pedal spring.
88280A
8.INSTALL CLUTCH START SWITCH ASSEMBLY
Install the clutch start switch assembly with the nut.
89280
9.INSTALL CLUTCH PEDAL STROKE SENSOR ASSEMBLY
55107A
10.INSTALL CLUTCH PEDAL SUPPORT SUB-ASSEMBLY
Install the clutch pedal support sub-assembly.
Install the bolt and 2 nuts.
Connect the 2 connectors and clamp.
31453A
11.INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN
|
MP Grease |
Apply MP grease to the contact surface of the clutch master cylinder push rod clevis with hole pin.
Connect the clevis to the clutch pedal assembly with the clutch master cylinder push rod clevis with hole pin.
Install the clutch master cylinder push rod clevis with hole pin from the right side of the vehicle.
Install a new clip to the clutch master cylinder push rod clevis with hole pin.
88280A
12.INSPECT CLUTCH START SWITCH ASSEMBLY
89280
13.INSPECT CLUTCH PEDAL STROKE SENSOR ASSEMBLY
31301
14.INSPECT CLUTCH PEDAL SUB-ASSEMBLY
15.INSTALL KNEE AIRBAG ASSEMBLY (for Driver Side)