86101R
1.INSTALL NO. 5 ANTENNA CORD SUB-ASSEMBLY
| *a | Marking (Body Side) |
| *b | Marking (Antenna Side) |
| *c | Marking (Back Door Side) |
Attach the grommet to within the range figure (A) as shown in the illustration.
| *a | Clamp |
| *b | Guide |
|
Bolt |
|
Connector |
|
Washer Hose |
Connect the washer hose and attach the clamp.
Attach the clamp.
Attach the guide to install the No. 5 antenna cord sub-assembly with the bolt.
Connect the connector.
|
Connector |
|
Washer Hose |
Connect the washer hose.
Connect the connector.
67750
2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
69196
3.INSTALL BACK DOOR GRIP BASE
69195A
4.INSTALL BACK DOOR GRIP
Use the same procedure described for the back door grip base.
67938A
5.INSTALL BACK DOOR SIDE GARNISH LH
67937B
6.INSTALL BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
67939B
7.INSTALL BACK DOOR CENTER GARNISH
8.INSTALL ROOF HEADLINING ASSEMBLY
9.INSPECT SEAT BELT WARNING SYSTEM (w/ Occupant Detection Sensor)
10.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)