Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH
RM3620E _58 Vehicle Interior _076050 LIGHTING (INT) _0370145 BACK DOOR COURTESY SWITCH A

LIGHTING (INT)  BACK DOOR COURTESY SWITCH  INSTALLATION  


PROCEDURE

Hide 69350P 1.INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY

NOTICE:
·

When installing a new back door lock with courtesy light switch assembly, if there are any strings attached to it, cut the strings off.



a.

w/ Power Back Door:

i.

Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.


ii.
E407987C02
0.781,1.083 1.042,1.708 true 2.135,1.469 2.365,1.708 0.229,0.24 10 true (1) 2.083,1.927 2.323,2.146 0.24,0.219 10 true (2) 2.188,1.188 2.417,1.438 0.229,0.25 10 true (4) 0.375,1.875 0.615,2.094 0.24,0.219 10 true (3) 0.677,0.865 0.854,1.073 0.177,0.208 10 true *a
*a Bolt A
V100135

Connector
V100136

Bolt


Temporarily install the bolt A.


iii.

Install the back door lock with courtesy light switch assembly with the 4 bolts in the order shown in the illustration.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


iv.

Connect the 2 connectors.



b.

w/o Power Back Door:

i.

Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.


ii.
E407988C02
0.948,1.396 0.729,0.99 true 2.625,1.031 2.823,1.229 0.198,0.198 10 true (1) 2.583,1.635 2.802,1.844 0.219,0.208 10 true (2) 0.323,1.708 0.542,1.917 0.219,0.208 10 true (3) 0.635,0.792 0.792,0.99 0.156,0.198 10 true *a
*a Bolt A
V100135

Connector
V100136

Bolt


Temporarily install the bolt A.


iii.

Install the back door lock with courtesy light switch assembly with the 3 bolts in the order shown in the illustration.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


iv.

Connect the connector.



Hide 67750 2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY

Hide 69196 3.INSTALL BACK DOOR GRIP BASE

Hide 69195A 4.INSTALL BACK DOOR GRIP

HINT:

Use the same procedure described for the back door grip base.


Hide 67938A 5.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 6.INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 67939B 7.INSTALL BACK DOOR CENTER GARNISH

Hide 8.INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)

Hide 9. INITIALIZE POWER BACK DOOR SYSTEM (w/ Power Back Door)