Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM3620E _58 Vehicle Interior _076046 DOOR LOCK _0370163 POWER DOOR LOCK CONTROL SYSTEM D

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  OPERATION CHECK  


CHECK CUSTOMIZE PARAMETERS


NOTICE:

The operation check below is based on the non-customized initial condition of the vehicle.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS



CHECK BASIC FUNCTION


a.

Check that all doors lock when the lock side of the door control switch is pressed.


b.

Check that all doors unlock when the unlock side of the door control switch is pressed.


c.

Check that all doors lock when the door key cylinder is turned to lock using the mechanical key.


d.

Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the mechanical key and all doors unlock when it is turned to unlock again.*1


e.

Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.*2

*1: Customize item "Unlock Key Twice" is set to "ON".

*2: Customize item "Unlock Key Twice" is set to "OFF".




CHECK KEY LOCK-IN PREVENTION FUNCTION


NOTICE:

In order to prevent the key from being locked in the vehicle, the following inspection should be performed with the driver door window open.


a.

Turn the ignition switch to ON or ACC.


b.

With the driver door open, check that all of the doors unlock immediately after the door lock knob for the driver door is pressed.


c.

With the driver door open, check that all of the doors unlock immediately after the lock side of the door control switch is pressed.


d.

With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all of the doors unlock.



CHECK SECURITY FUNCTION OF THE DOOR LOCK CONTROL SYSTEM


a.

Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)


b.

Hold the outside handle of the driver door, open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.


c.

Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.


d.

Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry operation*1. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

HINT:

Check that the security function of the door lock control system is canceled under the following conditions:

·

The hybrid control system is started.*2

·

The engine is started.*3

·

The unlock side of the door control switch is pressed when the lock position of any door is unlock.

·

The doors are unlocked by using the mechanical key.

·

The doors are unlocked by wireless operation.

·

The doors are unlocked by entry operation.*1


*1: w/ Entry Function

*2: for HV Model

*3: for Gasoline Model





CHECK SHIFT LINKED AUTOMATIC DOOR LOCK FUNCTION (except Manual Transaxle)


HINT:

The shift linked automatic door lock function can be customized. Make sure that this function is "ON" before performing.


a.

With the shift lever in P and the power switch on (READY)*1 or engine running*2, check that all doors lock automatically when the shift lever is moved to any position other than P.

*1: for HV Model

*2: for Gasoline Model




CHECK SPEED-SENSITIVE AUTOMATIC DOOR LOCK FUNCTION


HINT:

The speed-sensitive automatic door lock function can be customized. Make sure that this function is "ON" before performing.


a.

When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors lock automatically.



CHECK SHIFT LINKED AUTOMATIC DOOR UNLOCK FUNCTION (except Manual Transaxle)


HINT:

The shift linked automatic door unlock function can be customized. Make sure that this function is "ON" before performing.


a.

With the shift lever in any position other than P and the power switch on (READY)*1 or engine running*2, check that all doors unlock automatically when the shift lever is moved to P.

*1: for HV Model

*2: for Gasoline Model




CHECK DRIVER DOOR-LINKED AUTOMATIC DOOR UNLOCK FUNCTION


HINT:

The driver door-linked automatic door unlock function can be customized. Make sure that this function is "ON" before performing.


a.

When the driver door is closed, turning the ignition switch from ON to off and opening the driver door within approximately 45 seconds will automatically unlock all doors.



CHECK KEY-LINKED 2-STEP UNLOCK FUNCTION


HINT:

The key-linked 2-step unlock function can be customized. Make sure that this function is "ON" before performing.


a.

Lock all doors.


b.

Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all doors unlock when it is turned to unlock again.



CHECK DOUBLE LOCKING FUNCTION (w/ Double Locking System)


NOTICE:

Never activate the double locking function when there are people in the vehicle because the doors cannot be opened from the inside. If the doors are locked by accident, unlock the door by using the wireless unlock operation or entry unlock operation*.

*: w/ Entry Function



a.

Check that the double locking function is set by using the wireless door lock operation.

i.

Open all windows.


ii.

Turn the ignition switch off.


iii.

Open and close the driver door, and make sure that all doors are closed securely.


iv.

Press the door control transmitter*1 or electrical key transmitter*2 lock switch twice within 5 seconds, and check that the hazard warning lights flash once as an answer-back.

*1: w/o Entry and Start System

*2: w/ Entry and Start System



v.

Try to unlock all doors with the inside handle of the vehicle, and check that none of the doors unlock.



b.

Check that the double locking function is set by using the entry lock operation (w/ Entry and Start System).

i.

Open all windows.


ii.

Turn the ignition switch off.


iii.

Open and close the driver door, and make sure that all of the doors including the back door are closed securely.


iv.

Touch the lock sensor on the outside door handle twice while holding the electrical key transmitter sub-assembly within 5 seconds, and check that the hazard warning lights flash once as an answer-back.


v.

Try to unlock all of the doors with the inside handle of the vehicle, and check that none of the doors unlock.



c.

Check that the double locking function is canceled.

i.

Unlock the door by using the wireless unlock operation or entry unlock operation* while the double locking function is set, and check that the hazard warning lights flash twice as an answer-back.


ii.

Check that the doors can be opened both by the inside of the handle and the outside of the handle.

*: w/ Entry Function





CHECK ILLUMINATED ENTRY FUNCTION


Click hereVehicle Interior>LIGHTING (INT)>LIGHTING SYSTEM>OPERATION CHECK