Home › Drivetrain › UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE
RM3620E _52 Drivetrain _076122 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0370688 TRANSMISSION CONTROL CABLE A

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  INSTALLATION  


PROCEDURE

Hide 33820B 1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Pass the transmission control cable assembly into the vehicle and install the transmission control cable assembly to the vehicle body with the 2 nuts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.
C403011C01
1.583,1.917 1.75,1.917 1.75,1.917 2.083,1.635 true 1.375,1.833 1.542,2 0.167,0.167 10 true *a
*a Align the hole on the transmission control cable bracket with the protrusion of the vehicle body.


Connect the transmission control cable assembly to the vehicle body with the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

NOTICE:

Do not deform the transmission control cable bracket.



c.

Connect the transmission control cable assembly to the No. 1 transmission control cable bracket with a new clip.


d.
C402666C01
0.583,2 0.75,2.167 0.167,0.167 10 false *a 2.25,2 2.417,2.167 0.167,0.167 10 false *b
*a Correct
*b Incorrect


Connect the transmission control cable assembly to the transmission control shaft lever as shown in the illustration.

NOTICE:

Before installing the transmission control cable assembly, check that the park/neutral position switch assembly and shift lever are in N.



Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 58861B 3.INSTALL NO. 1 CONSOLE BOX DUCT

Hide 58810J 4.INSTALL CONSOLE BOX ASSEMBLY

Hide 58166A 5.INSTALL FRONT FLOOR COVER LH (w/ Cover)

Hide 51420 6.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 53895B 8.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

Hide 53896B 9.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

Hide 74404B 10.INSTALL BATTERY CLAMP SUB-ASSEMBLY