33820B
1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
Pass the transmission control cable assembly into the vehicle and install the transmission control cable assembly to the vehicle body with the 2 nuts.
| *a | Align the hole on the transmission control cable bracket with the protrusion of the vehicle body. |
Connect the transmission control cable assembly to the vehicle body with the nut.
Do not deform the transmission control cable bracket.
Connect the transmission control cable assembly to the No. 1 transmission control cable bracket with a new clip.
| *a | Correct |
| *b | Incorrect |
Connect the transmission control cable assembly to the transmission control shaft lever as shown in the illustration.
Before installing the transmission control cable assembly, check that the park/neutral position switch assembly and shift lever are in N.
33820B
2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
58861B
3.INSTALL NO. 1 CONSOLE BOX DUCT
58810J
4.INSTALL CONSOLE BOX ASSEMBLY
58152A
5.INSTALL FRONT LOWER NO. 1 FLOOR HEAT INSULATOR
Install the front lower No. 1 floor heat insulator to the vehicle body with the 3 nuts.
58165C
6.INSTALL FRONT FLOOR COVER RH (w/ Cover)
58166A
7.INSTALL FRONT FLOOR COVER LH (w/ Cover)
17410
8.INSTALL FRONT EXHAUST PIPE ASSEMBLY
51420
9.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
51441
10.INSTALL NO. 1 ENGINE UNDER COVER
53895B
11.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH
53896B
12.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH
74404B
13.INSTALL BATTERY CLAMP SUB-ASSEMBLY
89661
14.INSTALL ECM
15.INSTALL BATTERY
16.INSPECT SHIFT LEVER POSITION
17.ADJUST SHIFT LEVER POSITION