67914B
1.REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)
67913B
2.REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)
Use the same procedure as for the LH side.
62112
3.REMOVE COWL SIDE TRIM BOARD LH (for LHD)
62111C
4.REMOVE COWL SIDE TRIM BOARD RH (for RHD)
Use the same procedure as for the LH side.
55606
5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Use the same procedure for RHD and LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
78110K
6.REMOVE ACCELERATOR PEDAL(W/SENSOR) ROD ASSEMBLY
Avoid physical shock to the accelerator pedal sensor assembly.
Do not disassemble the accelerator pedal sensor assembly.
The accelerator pedal sensor assembly does not require lubrication.
Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.
| *A | for LHD |
| *B | for RHD |
Disconnect the accelerator pedal sensor assembly connector.
Remove the 3 nuts and disconnect the rod of the accelerator pedal sensor assembly from the accelerator pedal to remove the accelerator pedal sensor assembly.
If the accelerator pedal sensor assembly has been struck or dropped, replace it.
78118
7.REMOVE ACCELERATOR PEDAL PAD
Disengage the 4 claws and remove the accelerator pedal pad from the accelerator pedal.
78010F
8.REMOVE ACCELERATOR PEDAL ASSEMBLY
Remove the 2 bolts.
| *a | Vehicle Body |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Push the accelerator pedal assembly in the direction indicated by the arrow (1) shown in the illustration to disengage the claw.
Pull the accelerator pedal assembly in the direction indicated by the arrow (2) shown in the illustration to remove it.