Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING › 2018.10–2019.02
RM3620E _58 Vehicle Interior _076053 INTERIOR PANELS / TRIM _0370158 ROOF HEADLINING A

INTERIOR PANELS / TRIM  ROOF HEADLINING  REMOVAL  


PROCEDURE

Hide 64910N 1.REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

a.
B515127

Remove the tonneau cover assembly.


Hide 58410B 2.REMOVE DECK BOARD ASSEMBLY

a.
B515128

Remove the deck board assembly.


Hide 58416K 3.REMOVE REAR NO. 2 FLOOR BOARD

a.
B515134

Detach the clip and guide and remove the rear No. 2 floor board.


Hide 58417H 4.REMOVE REAR NO. 3 FLOOR BOARD

a.
B515133

Detach the clip and guide and remove the rear No. 3 floor board.


Hide 64993 5.REMOVE REAR DECK FLOOR BOX (w/o Spare Tire)

a.
B515132

Remove the clip and rear deck floor box.


Hide 64779K 6.REMOVE SPARE WHEEL COVER STOPPER (w/ Spare Tire)

a.
B515131

Remove the spare wheel cover stopper.


Hide 7.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

Hide 72693 8.REMOVE REAR SEAT CUSHION LOCK HOOK

Hide 67918E 9.REMOVE REAR DOOR SCUFF PLATE LH

a.

for Gasoline Model:

i.
B515207C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration and pull in the removal direction to detach the claw and guide.


ii.
B515208C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Place both hands at the position shown in the illustration and lift in the direction indicated by the arrow to detach the claw and guide and remove the rear door scuff plate LH.



b.

for HV Model:

i.
B515203C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration and pull in the removal direction to detach the claw and guide.


ii.
B515204C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Place both hands at the position shown in the illustration and lift in the direction indicated by the arrow to detach the claw, clip and guide and remove the rear door scuff plate LH.



Hide 67917C 10.REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 58386 11.REMOVE REAR FLOOR FINISH PLATE

a.
B515137

Detach the claw and clip and remove the rear floor finish plate.


Hide 12.REMOVE REAR SEATBACK ASSEMBLY LH

Hide 73350C 13.REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY (FLOOR ANCHOR)

Hide 14.REMOVE REAR SEATBACK ASSEMBLY RH

Hide 58466J 15.REMOVE NO. 2 BATTERY SERVICE COVER BOARD (for HV Model)

Hide 58467H 16.REMOVE NO. 3 BATTERY SERVICE COVER BOARD (for HV Model)

Hide 58464D 17.REMOVE BATTERY SERVICE COVER BOARD (for HV Model)

Hide 71304C 18.REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH

Hide 71303C 19.REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY>REMOVAL


Hide 73706 20.REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

Hide 73705 21.REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Interior>SEAT BELT>CHILD RESTRAINT SEAT ANCHOR BRACKET>REMOVAL


Hide 58577E 22.REMOVE REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

a.
B515138

Remove the 2 screws.


b.

Detach the clip and claw and remove the rear No. 1 floor mat support side plate.


Hide 62332C 23.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62331C 24.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 67914B 25.REMOVE FRONT DOOR SCUFF PLATE LH

a.
B515205C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration and pull in the removal direction to detach the claw and guide.


b.
B515206C01
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Place both hands at the position shown in the illustration and lift in the direction indicated by the arrow to detach the claw and guide and remove the front door scuff plate LH.


Hide 67913B 26.REMOVE FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 62112 27.REMOVE COWL SIDE TRIM BOARD LH

Hide 62111C 28.REMOVE COWL SIDE TRIM BOARD RH

HINT:

Use the same procedure described for the LH side.


Hide 62312B 29.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62311B 30.REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62212 31.REMOVE FRONT PILLAR GARNISH LH

a.
B515141C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration and pull in the direction indicated by the arrow to detach the front pillar garnish clip.


b.
B515143C01
0.698,0.917 1.177,0.271 1.177,0.271 0.667,0.583 true 1.188,0.167 1.396,0.354 0.208,0.188 10 true *a
*a Release Lever
V100135

Push


Push in the release lever with your finger and remove the front pillar garnish clip from the vehicle.


c.

When the front pillar garnish clip cannot be detached by pressing the knobs with the fingers:

i.
B475665C03
0,0 0,0 false
V113147

Direction (A)
V100135

Push


Lift up the front pillar garnish clip in the direction (A) while pressing the portion indicated by the arrow in the illustration with your fingers.


ii.
B475672C04
0,0 0,0 false
V113147

Direction (B)
V100135

Release Lever
V100136

Push


Push in the portion indicated by the arrow in the illustration with the screwdriver end while pulling the front pillar garnish clip with your fingers in the direction (B) to detach the front pillar garnish clip.



d.
B515142C01
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration and pull in the direction indicated by the arrow to detach the front pillar garnish clip.


e.
B515145C01
0.667,0.583 1.104,0.313 1.104,0.313 0.708,0.917 true 1.125,0.219 1.333,0.417 0.208,0.198 10 true *a
*a Release Lever
V100135

Push


Push in the release lever with your finger and remove the front pillar garnish clip from the vehicle.


f.

When the front pillar garnish clip cannot be detached by pressing the knobs with the fingers:

i.
B475665C03
0,0 0,0 false
V113147

Direction (A)
V100135

Push


Lift up the front pillar garnish clip in the direction (A) while pressing the portion indicated by the arrow in the illustration with your fingers.


ii.
B475672C04
0,0 0,0 false
V113147

Direction (B)
V100135

Release Lever
V100136

Push


Push in the portion indicated by the arrow in the illustration with the screwdriver end while pulling the front pillar garnish clip with your fingers in the direction (B) to detach the front pillar garnish clip.



g.
B515144C01
0,0 0,0 false
V113147

Remove in this Direction


Pull in the direction of the arrow shown in the illustration to detach the guide and remove the front pillar garnish LH.


h.

for 9 Speakers:

i.
B515148

Disconnect the connector.



i.
B515146C01
2.042,1.896 2.406,1.896 2.406,1.896 2.625,1.688 true 1.792,1.781 2.031,1.969 0.24,0.188 10 true *a
*a Protective Cover
V100155

Adhesive Tape


Protect curtain shield airbag assembly:

i.

Cover the airbag with a cloth or piece of nylon and secure both ends of the cover with adhesive tape as shown in the illustration.

NOTICE:

Cover the curtain shield airbag assembly with a protective cover as soon as the front pillar garnish assembly LH is removed.




Hide 62211 32.REMOVE FRONT PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 73233 33.REMOVE OUTER LAP BELT ANCHOR COVER

HINT:

Use the same procedure for both outer lap belt anchor covers.


a.
B515167

Detach the claw and guide and remove the outer lap belt anchor cover.


Hide 73220 34.REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH

a.
B515168

Remove the bolt and remove the front seat outer belt assembly LH.


Hide 73210 35.REMOVE FRONT SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62414A 36.REMOVE LOWER CENTER PILLAR GARNISH LH

a.
B515169C02
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Pull both sides of the lower center pillar garnish LH outward to detach the claw as shown in the illustration.


b.

Detach the clip and remove the lower center pillar garnish LH.


Hide 62413A 37.REMOVE LOWER CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62412 38.REMOVE CENTER PILLAR GARNISH LH

a.
B515170C02
0,0 0,0 false
V113146

Place Hands Here
V113147

Remove in this Direction


Remove the 2 clips.


b.

Place both hands at the position shown in the illustration, detach the clip and remove the center pillar garnish LH.


c.

When reusing the center pillar garnish LH:

i.
B528114

Remove the clip.



Hide 62411 39.REMOVE CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62552F 40.REMOVE REAR SEAT SIDE GARNISH LH

a.
B515171C02
0,0 0,0 false
V113146

Place Hand Here
V113147

Remove in this Direction


Place your hand at the position shown in the illustration, and detach the claw.


b.
B515172C02
0,0 0,0 false
V113147

Remove in this Direction


Detach the clip and claw and remove the rear seat side garnish LH as shown in the illustration.


Hide 62551F 41.REMOVE REAR SEAT SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 73708A 42.REMOVE TETHER ANCHOR BRACKET SET

HINT:

Use the same procedure for the opposite side.


a.
B515139C01
0,0 0,0 false
V113147

Turn Up in this Direction


Detach the claw and turn the cover up as shown in the illustration.


b.
B515140

Loosen the bolt and remove the tether anchor bracket set.


Hide 58460D 43.REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

HINT:

Use the same procedure for the opposite side.


a.
B515135

Remove the bolt.


b.

Detach the guide and remove the luggage hold belt striker assembly.


Hide 64740E 44.REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH

a.

Remove the clip.


b.

except "TORX" Type:

i.

Remove the screw.



c.

for "TORX" Type:

i.

Using a T30 "TORX" socket wrench, remove the "TORX" screw.



d.

Detach the clip, claw and guide and remove the deck trim side panel assembly LH.

B515173C02
0,0 0,0 false
V100135

Clip
V100136

Screw or "TORX" Screw



Hide 64730J 45.REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

a.

Remove the clip.


b.

except "TORX" Type:

i.

Remove the screw.



c.

for "TORX" Type:

i.

Using a T30 "TORX" socket wrench, remove the "TORX" screw.



d.

Detach the clip, claw and guide and remove the deck trim side panel assembly RH.

B515175C02
0,0 0,0 false
V100135

Clip
V100136

Screw or "TORX" Screw



e.

Disconnect each connector.


Hide 62480A 46.REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH

a.

Detach the clip and remove the inner roof side garnish assembly LH.

B515174C01
0.76,3.729 0.958,3.906 0.198,0.177 10 true *a 2.917,1.885 3.135,2.083 0.219,0.198 10 true *b 0.677,0.458 0.865,0.604 0.188,0.146 10 true *c 6.417,1.125 6.615,1.302 0.198,0.177 10 true *a 4.146,1.031 4.344,1.208 0.198,0.177 10 true *b 1.073,2.063 1.26,2.208 0.188,0.146 10 true *c 5.719,3.042 5.938,3.24 0.219,0.198 10 true *b 3.208,3.802 3.385,3.979 0.177,0.177 10 true *b
*a Clip A *b Clip B
*c Clip C - -



b.

When reusing the inner roof side garnish assembly LH:

i.

Remove the 8 clips.

B528115C01
0.615,0.26 0.813,0.458 0.198,0.198 10 false *a 5.302,2.906 5.531,3.094 0.229,0.188 10 false *b 5.427,0.26 5.646,0.448 0.219,0.188 10 false *c 6.26,2.427 6.458,2.625 0.198,0.198 10 true *a 5.792,2.01 6.01,2.198 0.219,0.188 10 true *c 1.948,2.25 2.177,2.438 0.229,0.188 10 true *b 3.958,1.344 4.188,1.531 0.229,0.188 10 true *b 3.396,0.625 3.625,0.813 0.229,0.188 10 true *b
*a Clip A *b Clip B
*c Clip C - -




Hide 62470A 47.REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 74320 48.REMOVE VISOR ASSEMBLY LH

a.
B515209

except "TORX" Type:

i.

Remove the 2 screws.



b.

for "TORX" Type:

i.

Using a T25 "TORX" socket wrench, remove the 2 "TORX" screws.



c.
B515236C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Pull in the direction of the arrow shown in the illustration (1) to detach the visor assembly LH from the visor holder LH.


d.

Pull in the direction of the arrow shown in the illustration (2) and remove the visor assembly LH.

NOTICE:

Do not twist or remove the visor assembly in any direction other than downwards as the connector may become damaged.



Hide 74310 49.REMOVE VISOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 74348 50.REMOVE VISOR HOLDER

HINT:

Use the same procedure for the opposite side.


a.
B515159C01
2.177,0.479 2.375,0.323 2.375,0.323 2.74,0.323 true 2.802,0.229 3.01,0.448 0.208,0.219 10 true *a
*a 45°
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Turn the visor holder end approximately 45° in the direction (1) indicated by the arrow shown in the illustration, and pull it out in the direction (2) indicated by the arrow.


b.
B515161

Detach the claw and remove the visor holder base.


Hide 74610U 51.REMOVE ASSIST GRIP ASSEMBLY

HINT:

Use the same procedure for all assist grip assemblies.


a.
B515152C01
1.938,0.594 2.521,0.594 true 2.479,3.083 2.938,3.083 true 2.552,0.479 2.781,0.708 0.229,0.229 10 true *a 3,2.969 3.344,3.156 0.344,0.188 10 true SST
*a Cutout


Insert SST into the cutout of the assist grip cover LH as shown in the illustration.

SST
09813-00010  

NOTICE:

To prevent the assist grip assembly from being damaged, make sure to insert SST straight into the cutout.



b.
B515153C01
2.552,1.958 2.75,2.146 0.198,0.188 10 true *a
*a 30 to 45°
V113147

Remove in this Direction


Pull SST as shown in the illustration to detach the claw.

NOTICE:

To prevent the assist grip assembly from being damaged, make sure to only pull SST as shown in the illustration.


HINT:

Use the same procedure for the claw on the other side of the assist grip cover LH.



c.

Remove the assist grip cover LH.

HINT:

Use the same procedure for the LH side and RH side.



d.
B515154

Pinch the clip with needle-nose pliers.

HINT:

Use the same procedure for both clips.



e.
B515155C01
0,0 0,0 false
V113147

Remove in this Direction


Hold the handle and pull in the direction indicated by the arrow shown in the illustration to remove the assist grip assembly.


f.

Using needle-nose pliers, remove the clip.


Hide 74630E 52.REMOVE REAR ASSIST GRIP ASSEMBLY LH

HINT:

Use the same procedure as for the assist grip assembly.


Hide 74620C 53.REMOVE REAR ASSIST GRIP ASSEMBLY RH

HINT:

Use the same procedure as for the assist grip assembly.


Hide 54.REMOVE MAP LIGHT ASSEMBLY

Hide 81240 55.REMOVE NO. 1 ROOM LIGHT ASSEMBLY

Hide 89943 56.REMOVE RAIN SENSOR COVER (w/ Rain Sensor)

Hide 87268W 57.REMOVE PROTECTOR (w/ Humidity Sensor)

HINT:

Use the same procedure as for the rain sensor cover.

Click hereVehicle Exterior>WIPER / WASHER>RAIN SENSOR>REMOVAL


Hide 86466E 58.REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Hide 86466D 59.REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Hide 87834 60.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror, w/o Pre-collision System)

Hide 63318C 61.REMOVE SUN ROOF OPENING TRIM MOULDING (for Moon Roof)

a.
B515181

Remove the sun roof opening trim moulding.


Hide 62.REMOVE ROOF HEADLINING ASSEMBLY (for Normal Roof)

a.

for Front Pillar LH Side:

i.

Remove the protective cover installed to the front pillar LH.


ii.
B515178

Disconnect the 2 connectors.


iii.

Using a clip remover, detach the wire harness clamp.


iv.

Install the protective cover to the front pillar LH.



b.

for Front Pillar RH Side:

i.

Remove the protective cover installed to the front pillar RH.


ii.
B515177

Disconnect the connector.


iii.

Using a clip remover, detach the wire harness clamp.


iv.

Install the protective cover to the front pillar RH.



c.
B515180

for Rear Pillar LH Side:

i.

Disconnect the connector.



d.
B515179

for Rear Pillar RH Side:

i.

Disconnect the connector.



e.

for LHD:

i.
B528062C01
2.583,0.865 2.875,1.083 0.292,0.219 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/o Pre-collision System:

Disconnect the connector.


ii.
B528061C01
3.031,0.896 3.313,1.146 0.281,0.25 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/ Pre-collision System:

Disconnect each connector.


iii.
B528060C01
2.458,0.417 2.729,0.646 0.271,0.229 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/o Pre-collision System:

Disconnect each connector.


iv.
B528059C01
3.031,0.917 3.302,1.125 0.271,0.208 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/ Pre-collision System:

Disconnect each connector.


v.
B528056C01
3.042,0.896 3.333,1.135 0.292,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ Digital Inner Mirror, w/ Pre-collision System:

Disconnect each connector.



f.

for RHD:

i.
B528053C01
0.594,0.823 0.854,1.063 0.26,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/o Pre-collision System:

Disconnect the connector.


ii.
B528054C01
0.156,0.885 0.427,1.125 0.271,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/ Pre-collision System:

Disconnect each connector.


iii.
B528051C01
0.573,0.563 0.833,0.802 0.26,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/o Pre-collision System:

Disconnect each connector.


iv.
B528052C01
0.167,0.875 0.417,1.104 0.25,0.229 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/ Pre-collision System:

Disconnect each connector.


v.
B528049C01
0.146,0.802 0.406,1.031 0.26,0.229 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ Digital Inner Mirror, w/ Pre-collision System:

Disconnect each connector.



g.
B515184

Remove the 5 clips.


h.
B515200C01
0,0 0,0 false
V113147

Remove in this Direction


Turn the roof headlining assembly diagonally and bend slightly to remove it from the back door.

NOTICE:
·

Make sure that wrinkles do not form in the roof headlining assembly during removal.

·

Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.

·

Do not damage the roof headlining assembly or vehicle interior.

·

2 or more people are required when carrying the roof headlining assembly out of the vehicle, as it may become deformed.




Hide 63.REMOVE ROOF HEADLINING ASSEMBLY (for Moon Roof)

a.

for Front Pillar LH Side:

i.

Remove the protective cover installed to the front pillar LH.


ii.
B515178

Disconnect the 2 connectors.


iii.

Using a clip remover, detach the wire harness clamp.


iv.

Install the protective cover to the front pillar LH.



b.

for Front Pillar RH Side:

i.

Remove the protective cover installed to the front pillar RH.


ii.
B515177

Disconnect the connector.


iii.

Using a clip remover, detach the wire harness clamp.


iv.

Install the protective cover to the front pillar RH.



c.
B515180

for Rear Pillar LH Side:

i.

Disconnect the connector.



d.
B515179

for Rear Pillar RH Side:

i.

Disconnect the connector.



e.

for LHD:

i.
B528062C01
2.583,0.865 2.875,1.083 0.292,0.219 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/o Pre-collision System:

Disconnect the connector.


ii.
B528061C01
3.031,0.896 3.313,1.146 0.281,0.25 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/ Pre-collision System:

Disconnect each connector.


iii.
B528060C01
2.458,0.417 2.729,0.646 0.271,0.229 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/o Pre-collision System:

Disconnect each connector.


iv.
B528059C01
3.031,0.917 3.302,1.125 0.271,0.208 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/ Pre-collision System:

Disconnect each connector.


v.
B528056C01
3.042,0.896 3.333,1.135 0.292,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ Digital Inner Mirror, w/ Pre-collision System:

Disconnect each connector.



f.

for RHD:

i.
B528053C01
0.594,0.823 0.854,1.063 0.26,0.24 12 true *A
*A w/ Rain Sensor


w/o EC Mirror, w/o Pre-collision System:

Disconnect the connector.


ii.
B528054C01
0.156,0.885 0.427,1.125 0.271,0.24 12 true *A
*A w/ Rain Sensor


w/o EC Mirror, w/ Pre-collision System:

Disconnect each connector.


iii.
B528051C01
0.573,0.563 0.833,0.802 0.26,0.24 12 true *A
*A w/ Rain Sensor


w/ EC Mirror, w/o Pre-collision System:

Disconnect each connector.


iv.
B528052C01
0.167,0.875 0.417,1.104 0.25,0.229 12 true *A
*A w/ Rain Sensor


w/ EC Mirror, w/ Pre-collision System:

Disconnect each connector.


v.
B528049C01
0.146,0.802 0.406,1.031 0.26,0.229 12 true *A
*A w/ Rain Sensor


w/ Digital Inner Mirror, w/ Pre-collision System:

Disconnect each connector.



g.
B515162

Disconnect the connector.


h.
B515183

Remove the 3 clips.


i.
B515201C01
0,0 0,0 false
V113147

Remove in this Direction


Turn the roof headlining assembly diagonally and bend slightly to remove it from the back door.

NOTICE:
·

Make sure that wrinkles do not form in the roof headlining assembly during removal.

·

Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.

·

Do not damage the roof headlining assembly or vehicle interior.

·

2 or more people are required when carrying the roof headlining assembly out of the vehicle, as it may become deformed.




Hide 64.REMOVE ROOF HEADLINING ASSEMBLY (for Panoramic Moon Roof)

a.

for Front Pillar LH Side:

i.

Remove the protective cover installed to the front pillar LH.


ii.
B515178

Disconnect the 2 connectors.


iii.

Using a clip remover, detach the wire harness clamp.


iv.

Install the protective cover to the front pillar LH.



b.

for Front Pillar RH Side:

i.

Remove the protective cover installed to the front pillar RH.


ii.
B515177

Disconnect the connector.


iii.

Using a clip remover, detach the wire harness clamp.


iv.

Install the protective cover to the front pillar RH.



c.
B515180

for Rear Pillar LH Side:

i.

Disconnect the connector.



d.
B515179

for Rear Pillar RH Side:

i.

Disconnect the connector.



e.

for LHD:

i.
B528062C01
2.583,0.865 2.875,1.083 0.292,0.219 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/o Pre-collision System:

Disconnect the connector.


ii.
B528061C01
3.031,0.896 3.313,1.146 0.281,0.25 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/ Pre-collision System:

Disconnect each connector.


iii.
B528060C01
2.458,0.417 2.729,0.646 0.271,0.229 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/o Pre-collision System:

Disconnect each connector.


iv.
B528059C01
3.031,0.917 3.302,1.125 0.271,0.208 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/ Pre-collision System:

Disconnect each connector.


v.
B528056C01
3.042,0.896 3.333,1.135 0.292,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ Digital Inner Mirror, w/ Lane Departure Alert System:

Disconnect each connector.



f.

for RHD:

i.
B528053C01
0.594,0.823 0.854,1.063 0.26,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/o Pre-collision System:

Disconnect the connector.


ii.
B528054C01
0.156,0.885 0.427,1.125 0.271,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/o EC Mirror, w/ Pre-collision System:

Disconnect each connector.


iii.
B528051C01
0.573,0.563 0.833,0.802 0.26,0.24 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/o Pre-collision System:

Disconnect each connector.


iv.
B528052C01
0.167,0.875 0.417,1.104 0.25,0.229 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ EC Mirror, w/ Pre-collision System:

Disconnect each connector.


v.
B528049C01
0.146,0.802 0.406,1.031 0.26,0.229 12 true *A
*A w/ Rain Sensor or w/ Humidity Sensor


w/ Digital Inner Mirror, w/ Pre-collision System:

Disconnect each connector.



g.
B515163

Disconnect the 2 connectors.


h.
B515183

Remove the 3 clips.


i.

Detach the fastener and guide.

B515185C01
2.375,0.375 2.615,0.573 0.24,0.198 10 true *a 2.208,2.135 2.448,2.323 0.24,0.188 10 true *b 4.177,0.406 4.417,0.604 0.24,0.198 10 true *a 3.76,2.563 4,2.76 0.24,0.198 10 true *a 5.115,2.552 5.354,2.75 0.24,0.198 10 true *a
*a Fastener *b Guide



j.
B515202C01
0,0 0,0 false
V113147

Remove in this Direction


Turn the roof headlining assembly diagonally and bend slightly to remove it from the back door.

NOTICE:
·

Make sure that wrinkles do not form in the roof headlining assembly during removal.

·

Make sure that the roof headlining assembly does not get caught on anything as it may become bent or damaged.

·

Do not damage the roof headlining assembly or vehicle interior.

·

2 or more people are required when carrying the roof headlining assembly out of the vehicle, as it may become deformed.




Hide 66425B 65.REMOVE REAR NO. 2 SIDE RAIL SPACER LH

HINT:

Perform this procedure only when replacing the rear No. 2 side rail spacer LH.


a.
B515182

Detach the claw and remove the rear No. 2 side rail spacer LH.


Hide 66415B 66.REMOVE REAR NO. 2 SIDE RAIL SPACER RH

HINT:
·

Perform this procedure only when replacing the rear No. 2 side rail spacer RH.

·

Use the same procedure described for the LH side.



Hide 64230A 67.REMOVE ROOM PARTITION NET ASSEMBLY (w/ Partition Net)

HINT:

Perform this procedure only when replacing the room partition net assembly.


a.
B515129C02
0.042,0.042 0.323,0.271 0.281,0.229 12 false *A 0.052,2.615 0.333,2.865 0.281,0.25 12 false *B
*A for HV Model
*B for Gasoline Model


Detach the claw and guide and remove the room partition net assembly.


Hide 64783C 68.REMOVE DECK TRIM POCKET COVER PLATE (except Partition Net)

HINT:

Perform this procedure only when replacing the deck trim pocket cover plate.


a.
B515130C03
0.052,0.042 0.396,0.313 0.344,0.271 12 false *A 0.073,2.396 0.333,2.604 0.26,0.208 12 false *B
*A for HV Model
*B for Gasoline Model


Detach the claw and guide and remove the deck trim pocket cover plate.


Hide 65351A 69.REMOVE BATTERY HOLE COVER (for HV Model)

HINT:

Perform this procedure only when replacing the battery hole cover.


a.
B515136

Detach the claw and remove the battery hole cover.