1.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
72693
2.REMOVE REAR SEAT CUSHION LOCK HOOK
67918E
3.REMOVE REAR DOOR SCUFF PLATE LH
58467H
4.REMOVE NO. 3 BATTERY SERVICE COVER BOARD
| *a | Clip (A) |
| *b | Clip (B) |
| *c | Clip (C) |
Remove the 2 clips (A).
Disengage the 3 clips (B), 2 clips (C) and guide to remove the No. 3 battery service cover board.
67917C
5.REMOVE REAR DOOR SCUFF PLATE RH
Use the same procedure as for the LH side.
58466J
6.REMOVE NO. 2 BATTERY SERVICE COVER BOARD
| *a | Clip (A) |
| *b | Clip (B) |
| *c | Clip (C) |
Remove the 2 clips (A).
Disengage the 3 clips (B), 2 clips (C) and guide to remove the No. 2 battery service cover board.
58464D
7.REMOVE BATTERY SERVICE COVER BOARD
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Pull the battery service cover board in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 clips.
Pull the battery service cover board in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides to remove it from the rear seat cushion leg sub-assembly.
71033
8.REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY
|
Remove in this Direction |
Remove the 6 bolts.
Pull in the direction of the arrow in the illustration and detach the 2 guides and remove the rear seat cushion leg sub-assembly.
G92D1
9.REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT
Disengage the 2 clamps.
Remove the 2 clips and No. 1 hybrid battery intake duct from the battery cooling blower assembly.
G9230
10.REMOVE BATTERY COOLING BLOWER ASSEMBLY
Disconnect the battery cooling blower assembly connector.
Remove the 2 bolts and battery cooling blower assembly from the HV battery.
Be sure not to touch the fan part of the battery cooling blower assembly.
Do not lift the battery cooling blower assembly using the wire harness.
G923B
11.REMOVE BATTERY COOLING BLOWER BRACKET
Disengage the clamp.
Remove the 3 bolts and battery cooling blower bracket from the battery cooling blower assembly.