Home › Drivetrain › K120F (MULTIDRIVE / CVT) › TCM
RM3620E _52 Drivetrain _076273 K120F MULTIDRIVE / CVT _0371767 TCM A

K120F MULTIDRIVE / CVT  TCM  INSTALLATION  


PROCEDURE

Hide 89539N 1.INSTALL NO. 2 TRANSMISSION CONTROL ECU BRACKET

a.

Install the No. 2 transmission control ECU bracket to the TCM with the 2 screws.

Torque:
5.8 N*m (59 kgf*cm, 51 in.*lbf)


Hide 89539M 2.INSTALL NO. 1 TRANSMISSION CONTROL ECU BRACKET

a.

Install the No. 1 transmission control ECU bracket to the TCM with the 2 screws.

Torque:
5.8 N*m (59 kgf*cm, 51 in.*lbf)


Hide 89535B 3.INSTALL TCM

a.

Install the TCM to the continuously variable transaxle assembly with the 2 bolts.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


b.
C400624C01
0,0 0,0 false
V113147

Install in this Direction


Connect the TCM connector and rotate the lever and attach the claw.

HINT:

Rotate the lever until the claw of the TCM connector makes a click sound.



c.

Connect the engine wire to the No. 2 transmission control ECU bracket with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Click hereGeneral>MAINTENANCE>M20A-FKS BATTERY>INSTALLATION

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 53737D 5.INSTALL FRONT FENDER APRON SEAL LH

Hide 51420 6.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 53896B 8.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

Hide 53895B 9.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH