Home › Drivetrain › K120F (MULTIDRIVE / CVT) › SHIFT STROKE SENSOR
RM3620E _52 Drivetrain _076273 K120F MULTIDRIVE / CVT _0371771 SHIFT STROKE SENSOR A

K120F MULTIDRIVE / CVT  SHIFT STROKE SENSOR  INSTALLATION  


PROCEDURE

Hide 89419B 1.INSTALL SHIFT STROKE SENSOR

a.
C395499

Coat the O-ring of the shift stroke sensor with Toyota Genuine CVT fluid FE.

NOTICE:

If reusing the shift stroke sensor, check that the O-ring is not damaged.



b.

Install the shift stroke sensor to the transaxle case sub-assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

Be careful not to damage the O-ring.



c.

Connect the shift stroke sensor connector.


Hide 74404B 2.INSTALL BATTERY CLAMP SUB-ASSEMBLY

Hide 4.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 17750A 5.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 12601B 6.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 8.INSPECT CONTINUOUSLY VARIABLE TRANSAXLE FLUID