73706
1.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH
Temporarily install the child restraint seat anchor bracket sub-assembly LH with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
w/ Seat Belt Warning System:
Attach the clamp.
73705
2.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
3.INSTALL REAR SEATBACK ASSEMBLY RH
73350C
4.INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (FLOOR ANCHOR)
5.INSTALL REAR SEATBACK ASSEMBLY LH
72693
6.INSTALL REAR SEAT CUSHION LOCK HOOK
7.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
8.INSPECT SEAT BELT WARNING SYSTEM (w/ Occupant Detection Sensor)
9.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)