71611
1.INSTALL REAR SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)
When installing a bench type rear seat cushion cover, refer to Precaution in order to prevent wrinkles from forming.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>PRECAUTION
Attach the hook to install the rear seat cushion pad (occupant detection sensor) to the bench type rear seat cushion cover.
Do not dirty or damage the bench type rear seat cushion cover.
Attach the clamp and claw.
Connect the 3 connectors.
Attach the hook.
for Gasoline Model:
for HV Model:
72693
2.INSTALL REAR SEAT CUSHION LOCK HOOK
3.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY
4.INSPECT SEAT BELT WARNING SYSTEM
5.INSPECT SEAT HEATER SYSTEM (w/ Seat Heater System)