Home › Engine / Hybrid System › M20A-FKS (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting)
RM3620E _51 Engine / Hybrid System _076384 M20A-FKS ENGINE CONTROL _0372631 VACUUM SWITCHING VALVE(for Engine Mounting) A

M20A-FKS ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  REMOVAL  


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 17750A 2.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 3.REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 17650H 4.REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

a.
A433243

Detach the wire harness clamp and disconnect the vacuum switching valve (for active control engine mount system) connector.


b.

Disconnect the 3 vacuum hoses from the vacuum switching valve (for active control engine mount system).


c.

Remove the nut and vacuum switching valve (for active control engine mount system) from the front engine mounting insulator.