Home › Engine / Hybrid System › M20A-FKS (ENGINE CONTROL) › ACCELERATOR PEDAL
RM3620E _51 Engine / Hybrid System _076384 M20A-FKS ENGINE CONTROL _0372635 ACCELERATOR PEDAL A

M20A-FKS ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 67914B 1.REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)

Hide 67913B 2.REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

HINT:

Use the same procedure as for the LH side.


Hide 62112 3.REMOVE COWL SIDE TRIM BOARD LH (for LHD)

Hide 62111C 4.REMOVE COWL SIDE TRIM BOARD RH (for RHD)

HINT:

Use the same procedure as for the LH side.


Hide 55606 5.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

HINT:

Use the same procedure for RHD and LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL


Hide 78110K 6.REMOVE ACCELERATOR PEDAL(W/SENSOR) ROD ASSEMBLY

NOTICE:
·

Avoid physical shock to the accelerator pedal sensor assembly.

·

Do not disassemble the accelerator pedal sensor assembly.

·

The accelerator pedal sensor assembly does not require lubrication.

·

Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.



a.
A431891C02
0.01,0.021 0.302,0.229 0.292,0.208 12 true *A 0.01,2.458 0.313,2.698 0.302,0.24 12 true *B
*A for LHD
*B for RHD


Disconnect the accelerator pedal sensor assembly connector.


b.

Remove the 3 nuts and disconnect the rod of the accelerator pedal sensor assembly from the accelerator pedal to remove the accelerator pedal sensor assembly.

NOTICE:

If the accelerator pedal sensor assembly has been struck or dropped, replace it.



Hide 78118 7.REMOVE ACCELERATOR PEDAL PAD

a.
A431892

Detach the 4 claws and remove the accelerator pedal pad from the accelerator pedal assembly.


Hide 78010F 8.REMOVE ACCELERATOR PEDAL ASSEMBLY

a.
A431894

Remove the 2 bolts.


b.
A431896C01
2.302,1.802 2.302,1.49 false 2.313,2.99 2.313,2.75 false 2.219,1.833 2.531,1.99 0.313,0.156 10 false *a 2.24,3.021 2.552,3.177 0.313,0.156 10 false *a
*a Vehicle Body
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Push the accelerator pedal assembly in the direction indicated by the arrow (1) shown in the illustration to detach the claw.


c.

Pull the accelerator pedal assembly in the direction indicated by the arrow (2) shown in the illustration to remove it.