Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA SYSTEM
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0372747 FRONT CAMERA SYSTEM C

CRUISE CONTROL  FRONT CAMERA SYSTEM  U032257  Software Incompatibility with Body Control Module Invalid/Incompatible Software Component  


DESCRIPTION

The forward recognition camera receives vehicle specification information from the main body ECU (multiplex network body ECU) via the CAN communication line. When the value of the vehicle specification information sent from the main body ECU (multiplex network body ECU) does not match the value stored by the forward recognition camera, the forward recognition camera outputs U032257.

DTC No. Detection Item DTC Detection Condition Trouble Area
U032257 Software Incompatibility with Body Control Module Invalid/Incompatible Software Component The value of the vehicle specification information sent from the main body ECU (multiplex network body ECU) does not match the value stored by the forward recognition camera
·

Front radar sensor system

·

Main body ECU (multiplex network body ECU)

·

Forward recognition camera



CAUTION / NOTICE / HINT

NOTICE:
·

w/ Entry and Start System:

When replacing the main body ECU (multiplex network body ECU), refer to the Service Bulletin.

·

When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment.

HINT:

Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".

One Time Recognition:

Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)

Sequential Recognition:

Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)




PROCEDURE

1.CHECK FOR DTC (FRONT RADAR SENSOR SYSTEM)
a.

Check the DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT RADAR SENSOR SYSTEM>DTC CHECK / CLEAR

Body Electrical > Front Radar Sensor > Trouble Codes
50001 429
OK:

DTC U030557 is not output.



Result:
Proceed to
OK
NG



OK

NG

REPLACE FORWARD RECOGNITION CAMERA