Home › Engine / Hybrid System › A25A-FXS (FUEL) › FUEL MAIN VALVE (w/o Canister Pump Module)
RM3620E _51 Engine / Hybrid System _076684 A25A-FXS FUEL _0373222 FUEL MAIN VALVE(w/o Canister Pump Module) A

A25A-FXS FUEL  FUEL MAIN VALVE(w/o Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 23070 1.INSTALL FUEL MAIN VALVE ASSEMBLY

a.

Apply gasoline to a new O-ring.


b.
A433818C01
1.958,0.74 2.208,0.344 2.208,0.344 2.375,0.344 true 1.698,1.417 2.115,1.917 2.115,1.917 2.281,1.917 true 2.406,0.26 2.719,0.417 0.313,0.156 10 false *1 2.323,1.833 2.635,1.99 0.313,0.156 10 false *2
*1 O-ring
*2 Spacer


Install the spacer and O-ring to the fuel main valve assembly.


c.

Install the fuel main valve assembly to the fuel suction with pump and gauge tube assembly.

NOTICE:

Make sure that the O-ring is not cut or pinched during installation.



d.

Attach the 3 claws and install the No. 3 fuel suction support to the fuel suction with pump and gauge tube assembly.


Hide 77020A 2.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 65351A 4.INSTALL BATTERY HOLE COVER

Hide 58416K 5.INSTALL REAR NO. 2 FLOOR BOARD

Hide 58410B 6.INSTALL DECK BOARD ASSEMBLY