Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0375834 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model)  P163181  Communication Error from ECM to VSC Invalid Serial Data Received  


DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) sends signals such as brake request signals to the hybrid vehicle control ECU assembly. When the hybrid vehicle control ECU assembly detects logic error signals sent from the skid control ECU (brake booster with master cylinder assembly) for a certain period of time, DTC P163181 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
P163181 Communication Error from ECM to VSC Invalid Serial Data Received When the power switch is on (IG) and the dynamic radar cruise control system is operating, the hybrid vehicle control ECU assembly detects logic error signals sent from the skid control ECU (brake booster with master cylinder assembly) for approximately 1 second or more.
·

Electronically controlled brake system

·

Hybrid vehicle control ECU assembly


Cruise Control

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the hybrid vehicle control ECU assembly, refer to Service Bulletin.


PROCEDURE

1.CHECK FOR DTCs (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
a.

Check for electronically controlled brake system DTCs.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster)>DTC CHECK / CLEAR

Chassis > ABS/VSC/TRC > Trouble Codes
50001 105

Result:
Result Proceed to
Electronically controlled brake system DTCs are not output A
Electronically controlled brake system DTCs are output B



A

2.CHECK FOR DTCs (Cruise Control)

B

2.CHECK FOR DTCs (Cruise Control)
a.

Clear the DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)>DTC CHECK / CLEAR

Powertrain > Cruise Control > Clear DTCs
50002 399

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)>DTC CHECK / CLEAR

Powertrain > Cruise Control > Trouble Codes
50001 399

Result:
Result Proceed to
DTC P163181 is not output A
DTC P163181 is output B



A

B

REPLACE HYBRID VEHICLE CONTROL ECU ASSEMBLY