Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING AMPLIFIER › 2018.10–2019.02
RM3620E _58 Vehicle Interior _076130 HEATING / AIR CONDITIONING _0374870 AIR CONDITIONING AMPLIFIER A

HEATING / AIR CONDITIONING  AIR CONDITIONING AMPLIFIER  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the air conditioning amplifier assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Air conditioning amplifier assembly
·

Reset air conditioning information

·

Learning air conditioning information


Stop and start system for A25A-FKS:(Click here)
for M20A-FKS:(Click here)

HINT:
·

Use the same procedure as for the LHD and RHD vehicles.

·

The procedure listed below is for the LHD vehicles.



PROCEDURE

Hide 88650N 2.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

a.

for LHD:

i.
E407919C01
2.677,1.177 2.854,1.365 0.177,0.188 10 true *a 2.677,0.344 2.854,0.531 0.177,0.188 10 true *a 0.365,0.656 0.542,0.844 0.177,0.188 10 true *b
*a Clamp
*b Guide


Detach the clamp.


ii.

Remove the screw.


iii.

Detach the guide.


iv.

Detach the guide.

E407920C01
0.135,0.167 0.365,0.385 0.229,0.219 12 true *A 3.719,0.167 3.948,0.385 0.229,0.219 12 true *B
*A for Type A *B for Type B
V113147

Remove in this Direction - -



v.

Pull out the air conditioning amplifier assembly as shown in the illustration.



b.

for RHD:

i.

Remove the screw.

E407921C01
0.125,0.135 0.354,0.354 0.229,0.219 12 true *A 3.74,0.135 3.969,0.354 0.229,0.219 12 true *B
*A for Type A *B for Type B
V113147

Remove in this Direction - -



ii.

Detach the guide.


iii.

Pull out the air conditioning amplifier assembly as shown in the illustration.



c.
E407922C01
0.104,0.094 0.479,0.333 0.375,0.24 12 false *A 0.104,2.323 0.479,2.563 0.375,0.24 12 false *B
*A for Type A
*B for Type B


Disconnect each connector and remove the air conditioning amplifier assembly.