Home › Vehicle Interior › DOOR LOCK › BACK DOOR LOCK
RM3620E _58 Vehicle Interior _076046 DOOR LOCK _0377381 BACK DOOR LOCK A

DOOR LOCK  BACK DOOR LOCK  INSTALLATION  


PROCEDURE

Hide 69350P 1.INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY (w/o Power Back Door)

NOTICE:

When installing a new back door lock with courtesy light switch assembly, if there are any strings attached to it, cut the strings off.


a.

Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.


b.
B522750C02
0.615,1.958 0.865,1.573 true 0.448,1.927 0.677,2.094 0.229,0.167 10 true *a 2.604,1.771 2.74,1.948 0.135,0.177 10 true 1 2.604,0.99 2.74,1.167 0.135,0.177 10 true 2 0.292,1.365 0.427,1.542 0.135,0.177 10 true 3
*a Bolt A


Temporarily install the bolt A.


c.

Install the back door lock with courtesy light switch assembly with the 3 bolts in the order shown in the illustration.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


d.
B522749

Connect the connector.


Hide 69350P 2.INSTALL BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY (w/ Power Back Door)

NOTICE:

When installing a new back door lock with courtesy light switch assembly, if there are any strings attached to it, cut the strings off.


a.

Apply MP grease to the sliding parts of the back door lock with courtesy light switch assembly.


b.
B522748C02
1.01,1.99 1.052,1.771 true 0.906,2 1.125,2.177 0.219,0.177 10 true *a 2.01,1.969 2.167,2.135 0.156,0.167 10 true 1 2.094,1.573 2.25,1.74 0.156,0.167 10 true 2 0.51,1.844 0.667,2.01 0.156,0.167 10 true 3 2.135,1.24 2.292,1.406 0.156,0.167 10 true 4
*a Bolt A
V100135

Bolt
V100136

Connector


Temporarily install the bolt A.


c.

Install the back door lock with courtesy light switch assembly with the 4 bolts in the order shown in the illustration.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)


d.

Connect the 2 connectors.


Hide 67750 3.INSTALL BACK DOOR TRIM BOARD ASSEMBLY

Hide 69196 4.INSTALL BACK DOOR GRIP BASE

Hide 69195A 5.INSTALL BACK DOOR GRIP

HINT:

Use the same procedure described for the back door grip base.


Hide 67938A 6.INSTALL BACK DOOR SIDE GARNISH LH

Hide 67937B 7.INSTALL BACK DOOR SIDE GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 67939B 8.INSTALL BACK DOOR CENTER GARNISH

Hide 9.INSPECT POWER BACK DOOR SYSTEM (w/ Power Back Door)

Hide 10. INITIALIZE POWER BACK DOOR SYSTEM (w/ Power Back Door)