89222A
1.INSTALL MULTIPLEX NETWORK DOOR ECU
Connect the 2 connectors.
Attach the guide and install the multiplex network door ECU in the order shown in the illustration.
Install the 2 bolts in the order shown in the illustration.
Do not reuse a multiplex network door ECU that has been subjected to an impact or dropped.
67750
2.INSTALL BACK DOOR TRIM BOARD ASSEMBLY
69196
3.INSTALL BACK DOOR GRIP BASE
69195A
4.INSTALL BACK DOOR GRIP
Use the same procedure described for the back door grip base.
67938A
5.INSTALL BACK DOOR SIDE GARNISH LH
67937B
6.INSTALL BACK DOOR SIDE GARNISH RH
Use the same procedure described for the LH side.
67939B
7.INSTALL BACK DOOR CENTER GARNISH
8. INITIALIZE POWER BACK DOOR SYSTEM
for Gasoline Model:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM (for Gasoline Model)>INITIALIZATION
for HV Model:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM (for HV Model)>INITIALIZATION
9.INSPECT POWER BACK DOOR SYSTEM
for Gasoline Model:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM (for Gasoline Model)>DATA LIST / ACTIVE TEST
for HV Model:
Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM (for HV Model)>DATA LIST / ACTIVE TEST