77030A
1.INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY
|
Install in this Direction |
Connect the connector.
Attach the guide and install the fuel lid lock with motor assembly as shown in the illustration.
77377
2.INSTALL FUEL FILLER OPENING LID LOCK RETAINER
|
Install in this Direction |
Rotate the fuel filler opening lid lock retainer counterclockwise and attach the guide, then install a new fuel filler opening lid lock retainer as shown in the illustration.
The fuel filler opening lid lock retainer is a non-reusable part. Make sure to replace it with a new one.
77378A
3.INSTALL FUEL FILLER OPENING LID LOCK COVER (w/ Canister Pump Module)
|
Install in this Direction |
Attach the claw and install a new fuel filler opening lid lock cover as shown in the illustration.
The fuel filler opening lid lock cover is a non-reusable part. Make sure to replace it with a new one.
64740E
4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
58460D
5.INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
73708A
6.INSTALL TETHER ANCHOR BRACKET SET
62552F
7.INSTALL REAR SEAT SIDE GARNISH LH
62332C
8.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
58577E
9.INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE
58386
10.INSTALL REAR FLOOR FINISH PLATE
64993
11.INSTALL REAR DECK FLOOR BOX (w/o Spare Tire)
58417H
12.INSTALL REAR NO. 3 FLOOR BOARD
58410B
13.INSTALL DECK BOARD ASSEMBLY
64910N
14.INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
73706
15.INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH
16.INSTALL REAR SEAT ASSEMBLY