85397
1.INSTALL LEVEL WARNING SWITCH ASSEMBLY
| *a | Protrusion |
| *b | Marking |
|
Install in this Direction |
Install the level warning switch assembly as shown in the illustration.
Make sure that the protrusion of the level warning switch assembly is between the 2 markings.
Connect the connector.
2.ADD WASHER FLUID
3.INSTALL FRONT BUMPER ASSEMBLY
86790
4.ADJUST FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
for Gasoline Model:
5.PERFORM CALIBRATION (w/ Parking Support Brake System)
for Gasoline Model: