CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
| *1 | Main body ECU (multiplex network body ECU) | - | - |
Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>REMOVAL
Reconnect the instrument panel junction block assembly connectors.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A-32 (IG) - Body ground | None - Body ground | Ignition power supply | Engine switch on (IG) | 11 to 14 V |
| Engine switch off | Below 1 V | |||
| A-31 (BECU) - Body ground | None - Body ground | Auxiliary battery power supply | Engine switch off | 11 to 14 V |
| A-30 (ACC) - Body ground | None - Body ground | ACC power supply | Engine switch on (ACC) | 11 to 14 V |
| Engine switch off | Below 1 V | |||
| A-11 (GND1) - Body ground | None - Body ground | Ground | Always | Below 1 Ω |
Install the main body ECU (multiplex network body ECU).
Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU (for LHD)>INSTALLATION
Measure the voltage and pulse according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| 4H-24 (LCTY) - Body ground | G - Body ground | Rear door courtesy light switch assembly LH input | Rear door LH open | Below 1 V |
| Rear door LH closed | 4.7 to 5.3 V | |||
| 4A-31 (RCTY) - Body ground | LA-V - Body ground | Rear door courtesy light switch assembly RH input | Rear door RH open | Below 1 V |
| Rear door RH closed | 4.7 to 5.3 V |
CHECK COMBINATION METER ASSEMBLY
Disconnect the G18 and G19 combination meter assembly connectors.
Measure the resistance and voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| G18-22 (B) - Body ground | B - Body ground | Auxiliary battery power supply | Engine switch off | 11 to 14 V |
| G18-38 (IG+) - Body ground | L - Body ground | Ignition power supply (IG signal) | Engine switch on (IG) | 11 to 14 V |
| Engine switch off | Below 1 V | |||
| G18-23 (ES) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| G19-36 (RLSB) - Body ground | SB - Body ground | Rear LH seat belt buckle switch signal | Rear LH seat belt fastened | 10 kΩ or higher |
| Rear LH seat belt unfastened | Below 1 Ω | |||
| G19-19 (RCSB) - Body ground | B - Body ground | Rear center seat belt buckle switch signal | Rear center seat belt fastened | 10 kΩ or higher |
| Rear center seat belt fastened | Below 1 Ω | |||
| G19-35 (RRSB) - Body ground | LG - Body ground | Rear RH seat belt buckle switch signal | Rear RH seat belt fastened | 10 kΩ or higher |
| Rear RH seat belt unfastened | Below 1 Ω |
CHECK AIRBAG SENSOR ASSEMBLY
CHECK OCCUPANT DETECTION ECU
for Gasoline Model: