Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster)
RM3620E _54 Brake _076410 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0379311 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/ Vacuum Brake Booster) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/ Vacuum Brake Booster)  C050C24  Left Rear Wheel Speed Sensor Signal Stuck High  C051224  Right Rear Wheel Speed Sensor Signal Stuck High  


DESCRIPTION

Refer to DTC C050C12

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster)>C050C12

DTC No. Detection Item DTC Detection Condition Trouble Area
C050C24 Left Rear Wheel Speed Sensor Signal Stuck High The speed sensor signal is not within the specified range for 5 seconds or more.
·

Rear speed sensor LH (rear axle hub and bearing assembly LH)*1

·

Rear speed sensor LH*2


C051224 Right Rear Wheel Speed Sensor Signal Stuck High The speed sensor signal is not within the specified range for 5 seconds or more.
·

Rear speed sensor RH (rear axle hub and bearing assembly RH)*1

·

Rear speed sensor RH*2



*1: for 2WD

*2: for 4WD/AWD

CAUTION / NOTICE / HINT

NOTICE:

After replacing or removing and installing a speed sensor, perform Dealer Mode (Signal Check) inspection to confirm that the speed sensors are operating correctly.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/ Vacuum Brake Booster)>TEST MODE PROCEDURE


PROCEDURE

1.CHECK VEHICLE
a.

Check the vehicle specification.


Result:
Result Proceed to
for 2WD A
for 4WD/AWD B



A

2.REPLACE REAR AXLE HUB AND BEARING ASSEMBLY

B

3.REPLACE REAR SPEED SENSOR
2.REPLACE REAR AXLE HUB AND BEARING ASSEMBLY
a.

Replace the rear axle hub and bearing assembly.

Click hereDrivetrain>AXLE AND DIFFERENTIAL>REAR AXLE HUB>REMOVAL


Result:
Proceed to
NEXT



NEXT

END

3.REPLACE REAR SPEED SENSOR

Result:
Proceed to
NEXT



NEXT

END