Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster)
RM3620E _54 Brake _076410 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0379312 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/o Vacuum Brake Booster) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(w/o Vacuum Brake Booster)  C147D  Air Bag Circuit  


DESCRIPTION

The skid control ECU (brake booster with master cylinder assembly) receives the secondary collision brake control request signal from the airbag sensor assembly.

DTC No. Detection Item INF Code DTC Detection Condition Trouble Area Note
C147D Air Bag Circuit 451 An abnormal secondary collision brake control request signal is received 2 times or more when communication with the airbag sensor assembly is possible. Airbag sensor assembly -

PROCEDURE

1.CHECK DTC

b.

Turn the power switch off.


c.

Turn the power switch on (IG).


d.

Check if the same DTC is output.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (w/o Vacuum Brake Booster)>DTC CHECK / CLEAR

Chassis > ABS/VSC/TRC > Trouble Codes
50001 105

Result:
Result Proceed to
DTC C147D is output. A
DTC C147D is not output. B



A

B