Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2019.02
RM3620E _58 Vehicle Interior _076051 METER / GAUGE / DISPLAY _0374621 METER / GAUGE SYSTEM J

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  Fuel Receiver Gauge Display Malfunction  


DESCRIPTION

for Gasoline Model:

The combination meter assembly uses the fuel sender gauge assembly and No. 2 fuel sender gauge assembly to detect the amount of fuel remaining in the fuel tank assembly. The Hall IC built into the fuel sender gauge assembly and No. 2 fuel sender gauge assembly changes the output voltage according to the amount of fuel remaining. The combination meter assembly receives fuel injection volume signals from the ECM and detects the voltage output from the fuel sender gauge assembly and No. 2 fuel sender gauge assembly and operates the fuel receiver gauge.


for HV Model:

The combination meter assembly uses the fuel sender gauge assembly to detect the amount of fuel remaining in the fuel tank assembly. The Hall IC built into the fuel sender gauge assembly changes the output voltage according to the amount of fuel remaining. The combination meter assembly receives fuel injection volume signals from the ECM and detects the voltage output from the fuel sender gauge assembly and operates the fuel receiver gauge.


WIRING DIAGRAM

for Gasoline Model:
C408679E02
5.479,3.167 5.792,3.365 0.313,0.198 10 false FR2 5.479,1.479 5.792,1.677 0.313,0.198 10 false FR 2.26,3.26 2.573,3.458 0.313,0.198 10 false FR 2.281,0.958 2.594,1.156 0.313,0.198 10 false FE 2.281,0.448 2.594,0.646 0.313,0.198 10 false FV 5.458,3.729 5.896,3.938 0.438,0.208 10 false FE&B 5.479,0.438 5.792,0.635 0.313,0.198 10 false FV 2.281,1.479 2.594,1.677 0.313,0.198 10 false FS 2.26,3.813 2.573,4.01 0.313,0.198 10 false FE 2.26,4.375 2.573,4.573 0.313,0.198 10 false FV 0.292,5 2.844,5.219 2.552,0.219 10 false No. 2 Fuel Sender Gauge Assembly 0.271,2.51 3.448,2.844 3.177,0.333 10 false Fuel Suction with Pump and Gauge Tube Assembly 5.25,5 7.135,5.25 1.885,0.25 10 false Combination Meter Assembly 6.083,2.292 6.396,2.49 0.313,0.198 10 false I/F 6.51,2.292 7.073,2.573 0.563,0.281 10 false CPU 5.26,4.813 5.813,5.01 0.552,0.198 10 false G18 0.302,4.833 0.854,5.031 0.552,0.198 10 false M18 0.25,2.344 0.802,2.542 0.552,0.198 10 false N27 5.229,1.479 5.781,1.677 0.552,0.198 10 false 31 5.24,3.729 5.792,3.927 0.552,0.198 10 false 24 5.219,0.438 5.771,0.635 0.552,0.198 10 false 14 5.219,3.167 5.771,3.365 0.552,0.198 10 false 13 2.563,0.406 3.115,0.604 0.552,0.198 10 false 1 2.563,0.958 3.115,1.156 0.552,0.198 10 false 2 2.563,1.479 3.115,1.677 0.552,0.198 10 false 3 2.563,4.26 3.115,4.458 0.552,0.198 10 false 1 2.563,3.729 3.115,3.927 0.552,0.198 10 false 2 2.552,3.156 3.104,3.354 0.552,0.198 10 false 3 0.5,1.896 2.792,2.125 2.292,0.229 10 false Fuel Sender Gauge Assembly 0.5,1.708 1.052,1.906 0.552,0.198 10 false A 1.896,1.479 2.448,1.677 0.552,0.198 10 false 1 1.896,0.958 2.448,1.156 0.552,0.198 10 false 2 1.896,0.438 2.448,0.635 0.552,0.198 10 false 3 6.75,0.271 7.042,0.479 0.292,0.208 10 false 5 V

for HV Model:
C408680E02
5.896,0.521 6.354,0.719 0.458,0.198 10 false I/F 6.313,0.51 6.771,0.708 0.458,0.198 10 false CPU 5.458,1.906 5.948,2.104 0.49,0.198 10 false FE&B 5.448,0.438 5.938,0.635 0.49,0.198 10 false FR 5.469,1.24 5.958,1.438 0.49,0.198 10 false FV 5.219,1.906 5.708,2.104 0.49,0.198 10 false 24 5.208,0.438 5.698,0.635 0.49,0.198 10 false 31 6.552,0.917 7.042,1.115 0.49,0.198 10 false 5 V 5.177,3.292 7.063,3.74 1.885,0.448 10 false Combination Meter Assembly 5.177,3.146 5.667,3.344 0.49,0.198 10 false G18 0.063,2.865 0.552,3.063 0.49,0.198 10 false N27 0.052,3.031 3.208,3.354 3.156,0.323 10 false Fuel Suction with Pump and Gauge Tube Assembly 0.292,2.344 2.25,2.833 1.958,0.49 10 false Fuel Sender Gauge Assembly 0.302,2.167 0.792,2.365 0.49,0.198 10 false A 2.333,1.906 2.823,2.104 0.49,0.198 10 false FE 2.323,0.427 2.813,0.625 0.49,0.198 10 false FS 2.323,1.229 2.813,1.427 0.49,0.198 10 false FV 2.615,1.24 3.104,1.438 0.49,0.198 10 false 1 2.615,1.896 3.104,2.094 0.49,0.198 10 false 2 2.615,0.427 3.104,0.625 0.49,0.198 10 false 3 1.917,0.417 2.406,0.615 0.49,0.198 10 false 1 1.917,1.896 2.406,2.094 0.49,0.198 10 false 2 1.917,1.24 2.406,1.438 0.49,0.198 10 false 3 5.219,1.24 5.708,1.438 0.49,0.198 10 false 14

CAUTION / NOTICE / HINT

CAUTION:

Be careful of flames.


NOTICE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.


PROCEDURE

1.CHECK FOR DTC
a.

Check if DTCs are output.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR

Body Electrical > Combination Meter > Trouble Codes
50001 409
OK:

DTCs are not output.



Result:
Proceed to
OK
NG



OK

2.CHECK FOR DTC (SFI SYSTEM)

NG

2.CHECK FOR DTC (SFI SYSTEM)

OK

3.PERFORM ACTIVE TEST USING GTS

NG

3.PERFORM ACTIVE TEST USING GTS
a.

Using the GTS, perform the Active Test.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Fuel Gauge Operation (Sender E) Fuel receiver gauge (Sender E) ON See [Display]
Fuel Gauge Operation (Empty) Fuel receiver gauge (Empty) ON See [Display]
Fuel Gauge Operation (Warning) Fuel receiver gauge (Warning) ON See [Display]
Fuel Gauge Operation (1/4) Fuel receiver gauge (1/4) ON See [Display]
Fuel Gauge Operation (1/2) Fuel receiver gauge (1/2) ON See [Display]
Fuel Gauge Operation (3/4) Fuel receiver gauge (3/4) ON See [Display]
Fuel Gauge Operation (Full) Fuel receiver gauge (Full) ON See [Display]
Fuel Gauge Operation (Sender F) Fuel receiver gauge (Sender F) ON See [Display]
Body Electrical > Combination Meter > Active Test
Tester Display
Fuel Gauge Operation (Sender E)
50004 409 221
Body Electrical > Combination Meter > Active Test
Tester Display
Fuel Gauge Operation (Empty)
50004 409 222
Body Electrical > Combination Meter > Active Test
Tester Display
Fuel Gauge Operation (Warning)
50004 409 223
Body Electrical > Combination Meter > Active Test
Tester Display
Fuel Gauge Operation (1/4)
50004 409 224
Body Electrical > Combination Meter > Active Test
Tester Display
Fuel Gauge Operation (1/2)
50004 409 225
Body Electrical > Combination Meter > Active Test
Tester Display
Fuel Gauge Operation (3/4)
50004 409 226
Body Electrical > Combination Meter > Active Test
Tester Display
Fuel Gauge Operation (Full)
50004 409 227
Body Electrical > Combination Meter > Active Test
Tester Display
Fuel Gauge Operation (Sender F)
50004 409 228
OK:

Fuel receiver gauge indication is normal.


i.
for 4.2 Inch Model with Telematics System (except ERA-GLONASS) or 4.2 Inch Model without Telematics System:
C429738C02
0.281,1.646 0.594,1.844 0.313,0.198 10 false *a 0.552,1.792 0.865,1.99 0.313,0.198 10 false *b 0.802,1.854 1.115,2.052 0.313,0.198 10 false *c 1.125,1.958 1.438,2.156 0.313,0.198 10 false *d 1.698,1.979 2.01,2.177 0.313,0.198 10 false *e 2.25,1.969 2.563,2.167 0.313,0.198 10 false *f 2.885,1.865 3.073,2.052 0.188,0.188 10 false *g 3.24,1.781 3.427,1.979 0.188,0.198 10 false *h
*a Fuel Gauge Operation (Sender E)
*b Fuel Gauge Operation (Empty)
*c Fuel Gauge Operation (Warning)
*d Fuel Gauge Operation (1/4)
*e Fuel Gauge Operation (1/2)
*f Fuel Gauge Operation (3/4)
*g Fuel Gauge Operation (Full)
*h Fuel Gauge Operation (Sender F)


for 4.2 Inch Model with Telematics System (for ERA-GLONASS):
B616649C02
0.281,1.646 0.594,1.844 0.313,0.198 10 false *a 0.552,1.792 0.865,1.99 0.313,0.198 10 false *b 0.802,1.854 1.115,2.052 0.313,0.198 10 false *c 1.125,1.958 1.438,2.156 0.313,0.198 10 false *d 1.698,1.979 2.01,2.177 0.313,0.198 10 false *e 2.25,1.969 2.563,2.167 0.313,0.198 10 false *f 2.885,1.865 3.073,2.052 0.188,0.188 10 false *g 3.24,1.781 3.427,1.979 0.188,0.198 10 false *h
*a Fuel Gauge Operation (Sender E)
*b Fuel Gauge Operation (Empty)
*c Fuel Gauge Operation (Warning)
*d Fuel Gauge Operation (1/4)
*e Fuel Gauge Operation (1/2)
*f Fuel Gauge Operation (3/4)
*g Fuel Gauge Operation (Full)
*h Fuel Gauge Operation (Sender F)


for 7 Inch Model with Telematics System (except ERA-GLONASS) or 7 Inch Model without Telematics System:
C422710C03
1,1.844 2.667,1.417 false 2.656,1.948 2.969,2.104 0.313,0.156 10 false *a 2.688,1.677 3,1.833 0.313,0.156 10 false *b 2.719,1.313 3.031,1.469 0.313,0.156 10 false *c 2.51,1.073 2.823,1.229 0.313,0.156 10 false *d 2.135,0.521 2.448,0.677 0.313,0.156 10 false *e 1.625,0.156 1.938,0.313 0.313,0.156 10 false *f 1,0.052 1.396,0.302 0.396,0.25 10 false *g 0.854,0.063 1.167,0.219 0.313,0.156 10 false *h
*a Fuel Gauge Operation (Sender E)
*b Fuel Gauge Operation (Empty)
*c Fuel Gauge Operation (Warning)
*d Fuel Gauge Operation (1/4)
*e Fuel Gauge Operation (1/2)
*f Fuel Gauge Operation (3/4)
*g Fuel Gauge Operation (Full)
*h Fuel Gauge Operation (Sender F)


for 7 Inch Model with Telematics System (for ERA-GLONASS):
B616650C02
2.75,1.76 3.063,1.917 0.313,0.156 10 true *a 2.75,1.583 3.063,1.74 0.313,0.156 10 true *b 2.688,1.292 3,1.448 0.313,0.156 10 true *c 2.594,0.969 2.906,1.125 0.313,0.156 10 true *d 2.229,0.479 2.542,0.635 0.313,0.156 10 true *e 1.698,0.073 2.01,0.229 0.313,0.156 10 true *f 1.125,0 1.365,0.167 0.24,0.167 10 true *g 0.906,0.01 1.104,0.167 0.198,0.156 10 true *h
*a Fuel Gauge Operation (Sender E)
*b Fuel Gauge Operation (Empty)
*c Fuel Gauge Operation (Warning)
*d Fuel Gauge Operation (1/4)
*e Fuel Gauge Operation (1/2)
*f Fuel Gauge Operation (3/4)
*g Fuel Gauge Operation (Full)
*h Fuel Gauge Operation (Sender F)


[Display]: Fuel receiver gauge



Result:
Result Proceed to
OK (for Gasoline Model) A
OK (for HV Model) B
NG C



A

4.CHECK HARNESS AND CONNECTOR (FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY - COMBINATION METER ASSEMBLY)

B

8.CHECK HARNESS AND CONNECTOR (FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY - COMBINATION METER ASSEMBLY)

C

REPLACE COMBINATION METER ASSEMBLY

4.CHECK HARNESS AND CONNECTOR (FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY - COMBINATION METER ASSEMBLY)
a.

Disconnect the G18 combination meter assembly connector.


b.

Disconnect the N27 fuel suction with pump and gauge tube assembly connector.


c.

Disconnect the M18 No. 2 fuel sender gauge assembly connector.


d.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N27-3 (FS) - G18-31 (FR) Always Below 1 Ω
N27-2 (FE) - G18-24 (FE&B) Always Below 1 Ω
N27-1 (FV) - G18-14 (FV) Always Below 1 Ω
M18-3 (FR) - G18-13 (FR2) Always Below 1 Ω
M18-2 (FE) - G18-24 (FE&B) Always Below 1 Ω
M18-1 (FV) - G18-14 (FV) Always Below 1 Ω
N27-3 (FS) or G18-31 (FR) - Other terminals and body ground Always 10 kΩ or higher
N27-2 (FE) or G18-24 (FE&B) - Other terminals and body ground Always 10 kΩ or higher
N27-1 (FV) or G18-14 (FV) - Other terminals and body ground Always 10 kΩ or higher
M18-3 (FR) or G18-13 (FR2) - Other terminals and body ground Always 10 kΩ or higher
M18-2 (FE) or G18-24 (FE&B) - Other terminals and body ground Always 10 kΩ or higher
M18-1 (FV) or G18-14 (FV) - Other terminals and body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.INSPECT FUEL SENDER GAUGE ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

5.INSPECT FUEL SENDER GAUGE ASSEMBLY


Result:
Proceed to
OK
NG



OK

6.INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

NG

6.INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
E386946C03
0.198,3.771 0.708,4.01 0.51,0.24 0.219,1.25 0.729,1.49 0.51,0.24 0.917,0.594 1.198,0.594 1.198,0.594 1.438,1.302 true 2.667,2.125 2.417,2.125 2.417,2.125 2.042,1.281 true 1.802,0.563 1.49,0.563 1.49,0.563 1.729,1.271 true 0.375,1.302 0.833,1.5 0.458,0.198 10 false N27 0.677,0.521 0.99,0.729 0.313,0.208 10 false FS 1.948,0.5 2.406,0.698 0.458,0.198 10 false FE 2.781,2.073 3.24,2.271 0.458,0.198 10 false FV 0.406,3.813 0.865,4.01 0.458,0.198 10 false A 0.104,0.094 0.417,0.25 0.313,0.156 10 false *a
*a Component without harness connected
(Fuel Suction with Pump and Gauge Tube Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N27-1 (FV) - A-3 Always Below 1 Ω
N27-2 (FE) - A-2 Always Below 1 Ω
N27-3 (FS) - A-1 Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

7.INSPECT NO. 2 FUEL SENDER GAUGE ASSEMBLY

NG

REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

7.INSPECT NO. 2 FUEL SENDER GAUGE ASSEMBLY


Result:
Proceed to
OK
NG



OK

CLEAN INSIDE OF FUEL TANK ASSEMBLY

NG

8.CHECK HARNESS AND CONNECTOR (FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY - COMBINATION METER ASSEMBLY)
a.

Disconnect the N27 fuel suction with pump and gauge tube assembly connector.


b.

Disconnect the G18 combination meter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N27-3 (FS) - G18-31 (FR) Always Below 1 Ω
N27-2 (FE) - G18-24 (FE&B) Always Below 1 Ω
N27-1 (FV) - G18-14 (FV) Always Below 1 Ω
N27-3 (FS) or G18-31 (FR) - Other terminals and body ground Always 10 kΩ or higher
N27-2 (FE) or G18-24 (FE&B) - Other terminals and body ground Always 10 kΩ or higher
N27-1 (FV) or G18-14 (FV) - Other terminals and body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

9.INSPECT FUEL SENDER GAUGE ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

9.INSPECT FUEL SENDER GAUGE ASSEMBLY


Result:
Proceed to
OK
NG



OK

10.INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

NG

10.INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
E386946C03
0.198,3.771 0.708,4.01 0.51,0.24 0.219,1.25 0.729,1.49 0.51,0.24 0.917,0.594 1.198,0.594 1.198,0.594 1.438,1.302 true 2.667,2.125 2.417,2.125 2.417,2.125 2.042,1.281 true 1.802,0.563 1.49,0.563 1.49,0.563 1.729,1.271 true 0.375,1.302 0.833,1.5 0.458,0.198 10 false N27 0.677,0.521 0.99,0.729 0.313,0.208 10 false FS 1.948,0.5 2.406,0.698 0.458,0.198 10 false FE 2.781,2.073 3.24,2.271 0.458,0.198 10 false FV 0.406,3.813 0.865,4.01 0.458,0.198 10 false A 0.104,0.094 0.417,0.25 0.313,0.156 10 false *a
*a Component without harness connected
(Fuel Suction with Pump and Gauge Tube Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
N27-1 (FV) - A-3 Always Below 1 Ω
N27-2 (FE) - A-2 Always Below 1 Ω
N27-3 (FS) - A-1 Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

CLEAN INSIDE OF FUEL TANK ASSEMBLY

NG

REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY