Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION MEMBER (for HV Model) › from 2019.02
RM3620E _53 Suspension _076490 FRONT SUSPENSION _0372230 FRONT SUSPENSION MEMBER(for HV Model) A

FRONT SUSPENSION  FRONT SUSPENSION MEMBER(for HV Model)  INSTALLATION  


PROCEDURE

Hide 17572B 1.INSTALL NO. 2 EXHAUST PIPE SUPPORT BRACKET

a.

Install the No. 2 exhaust pipe support bracket to the front frame assembly with the 2 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 48069 2.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH

a.

Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.


b.
C403175N01
0.615,0.719 0.771,0.917 0.156,0.198 10 false 1 1.156,0.5 1.313,0.698 0.156,0.198 10 true 2 2.708,1.302 2.865,1.5 0.156,0.198 10 false 3

Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.

Torque:
Bolt (1), (2) : 200 N*m (2039 kgf*cm, 148 ft.*lbf)
Bolt (3) : 135 N*m (1377 kgf*cm, 100 ft.*lbf)

NOTICE:

Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.



Hide 48068 3.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 44250 4.INSTALL RACK AND PINION POWER STEERING GEAR ASSEMBLY

Hide 5.INSTALL FRONT STABILIZER BAR WITH BRACKET

Hide 51100H 6.INSTALL FRONT FRAME ASSEMBLY

a.

Install the rear engine mounting insulator to the front frame assembly with the 4 nuts.

Torque:
72 N*m (734 kgf*cm, 53 ft.*lbf)


b.

Install the front engine mounting insulator to the front frame assembly with the 3 nuts.

Torque:
72 N*m (734 kgf*cm, 53 ft.*lbf)


Hide 45319 8.INSTALL STEERING GEAR HEAT INSULATOR (for LHD)