Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING › from 2019.09
RM3620E _59 Vehicle Exterior _076404 EXTERIOR PANELS / TRIM _0377216 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 76902A 1.REMOVE SIDE MUDGUARD SUB-ASSEMBLY LH

Hide 65632B 2.REMOVE REAR WHEEL FRONT HOUSE PLATE LH

Hide 75874 3.REMOVE QUARTER PANEL WHEEL OPENING MOULDING LH

Hide 75860A 4.REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH

a.

Put protective tape around the body rocker panel moulding assembly LH.

B525907C01
0,0 0,0 false
V100155

Protective Tape - -



b.

Remove the 2 screws.

B525908


c.

Remove the 2 clips labeled A.


d.

Remove the 8 clips labeled B.

i.

Using a screwdriver with its tip wrapped with protective tape, detach the claw as shown in the illustration.


ii.

Using needle-nose pliers, detach the claw to remove the clip B as shown in the illustration

B560722C03
3.344,3.594 3.344,3.979 true 3.135,3.49 3.135,3.875 true 2.896,3.375 2.896,3.76 true 2.563,3.219 2.563,3.604 true 2.25,3.063 2.25,3.448 true 1.896,2.896 1.896,3.281 true 1.438,2.667 1.438,3.052 true 1.063,2.521 1.063,2.906 true 0.688,2.344 0.688,2.729 true 3.594,3.708 3.594,4.094 true 0.604,2.75 0.76,2.938 0.156,0.188 10 true *a 0.99,2.885 1.146,3.073 0.156,0.188 10 true *a 1.354,3.052 1.51,3.24 0.156,0.188 10 true *b 1.813,3.281 1.969,3.469 0.156,0.188 10 true *b 2.167,3.448 2.323,3.635 0.156,0.188 10 true *b 2.479,3.604 2.635,3.792 0.156,0.188 10 true *b 2.813,3.76 2.969,3.948 0.156,0.188 10 true *b 3.063,3.875 3.219,4.063 0.156,0.188 10 true *b 3.26,3.979 3.417,4.167 0.156,0.188 10 true *b 3.51,4.094 3.667,4.281 0.156,0.188 10 true *b
*a Clip A *b Clip B
V113146

Insert Screwdriver Here
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)
V113149

Remove in this Direction (3)
V100155

Protective Tape - -




e.

Detach the clip and remove the body rocker panel moulding assembly LH in the order shown in the illustration.

B552541C01
1.542,1.229 1.76,1.417 0.219,0.188 10 true (1) 2.344,1.073 2.563,1.26 0.219,0.188 10 true (2) 2.823,0.99 3.042,1.177 0.219,0.188 10 true (3) 3.26,0.917 3.479,1.104 0.219,0.188 10 true (4) 3.698,0.833 3.917,1.021 0.219,0.188 10 true (5) 4.292,0.708 4.51,0.896 0.219,0.188 10 true (6) 4.74,0.625 4.958,0.813 0.219,0.188 10 true (7) 5.198,0.552 5.417,0.74 0.219,0.188 10 true (8) 5.625,0.458 5.844,0.646 0.219,0.188 10 true (9)
V113146

Place Hand Here
V113147

Remove in this Direction



f.
B526256

Using a clip remover, remove the grommet.

HINT:

Use the same procedure for the other side.