Home › General › MAINTENANCE › Q610 HYBRID TRANSAXLE FLUID › from 2019.09
RM3620E _V1 General _076298 MAINTENANCE _0388731 Q610 HYBRID TRANSAXLE FLUID A

MAINTENANCE  Q610 HYBRID TRANSAXLE FLUID  REPLACEMENT  


CAUTION / NOTICE / HINT

NOTICE:

For the hybrid transaxle fluid, use Toyota Genuine ATF WS.

Using transmission fluid other than the above type may cause abnormal noise or vibration, or ultimately damage the transmission of your vehicle.


PROCEDURE

Hide 58398F 1.REMOVE NO. 1 FLOOR UNDER COVER (w/ No. 1 Floor Under Cover)

Hide 2.REPLACE HYBRID TRANSAXLE FLUID

a.

Make sure that the vehicle will remain level, and lift the vehicle.


b.
C407249C01
2,3.177 2.292,3.177 2.292,3.177 2.479,2.948 false 2.74,3.063 3.042,3.063 false 1.802,3.094 2.021,3.323 0.219,0.229 10 false *1 3.073,2.979 3.302,3.219 0.229,0.24 10 false *2
*1 10 mm Union Nut Wrench
*2 10 mm Straight Hexagon


Using a 10 mm union nut wrench and 10 mm straight hexagon, remove the filler plug and gasket from the rear traction motor with transaxle assembly.


c.
C402463C01
2.438,1.74 2.813,1.99 2.813,1.99 3,1.99 true 3.031,1.906 3.271,2.125 0.24,0.219 10 false *1
*1 Drain Plug


Using a 10 mm socket hexagon wrench, remove the drain plug and gasket from the rear traction motor with transaxle assembly and drain the hybrid transaxle fluid.


d.

Using a 10 mm socket hexagon wrench, install the drain plug and a new gasket to the rear traction motor with transaxle assembly.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


e.
C402464C01
2.375,1.094 2.552,0.74 2.552,0.74 2.698,0.74 false 0.292,0.813 0.438,0.813 0.438,0.813 0.896,1.24 true 0.104,0.729 0.323,0.948 0.219,0.219 10 false *1 2.719,0.646 2.948,0.906 0.229,0.26 10 false *a 3.042,1.667 3.229,1.906 0.188,0.24 10 false *b
*1 Filler Plug
*a Filler Nozzle
*b 0 to 5 mm (0 to 0.196 in.)


Add hybrid transaxle fluid until the hybrid transaxle fluid level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the filler plug opening. [*]

NOTICE:
·

Use Toyota Genuine ATF WS.

Using transmission fluid other than the above type may cause abnormal noise or vibration, or ultimately damage the transmission of your vehicle.

·

Be sure to fully insert the filler nozzle into the filler plug opening.

·

Be sure to add hybrid transaxle fluid slowly. If hybrid transaxle fluid is added quickly, the hybrid transaxle fluid may hit internal parts and bounce back, resulting in hybrid transaxle fluid coming out of the filler plug opening.

·

Be sure to directly check that the hybrid transaxle fluid level is within the specified range.

·

An insufficient or excessive amount of hybrid transaxle fluid may damage the rear traction motor with transaxle assembly.



Reference:

1.7 liters (1.8 US qts, 1.5 Imp. qts)



f.

After adding hybrid transaxle fluid, leave the vehicle for 30 seconds so that the hybrid transaxle fluid surface can become still again, and then check that the hybrid transaxle fluid level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the filler plug opening. (If the hybrid transaxle fluid level is too low, return to the Add Hybrid Transaxle Fluid procedure [*].)

NOTICE:

After adding hybrid transaxle fluid, make sure to check the hybrid transaxle fluid level.



g.
C407250C01
2.708,3.021 3.052,3.021 false 1.917,3.188 2.229,3.188 2.229,3.188 2.385,2.927 false 1.708,3.104 1.927,3.313 0.219,0.208 10 false *1 3.083,2.938 3.333,3.167 0.25,0.229 10 false *2 1.583,2.156 1.823,2.396 0.24,0.24 10 false *a
*1 10 mm Union Nut Wrench
*2 10 mm Straight Hexagon
*a Torque Wrench Fulcrum Length


Using a 10 mm union nut wrench and 10 mm straight hexagon, install the filler plug and a new gasket to the rear traction motor with transaxle assembly.

Torque:
Specified tightening torque : 39 N*m (398 kgf*cm, 29 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 180 mm (7.0866 in.)): 34.8 N*m (355 kgf*cm, 26 ft.*lbf)




h.

Check for hybrid transaxle fluid leaks.


i.

Lower the vehicle.


Hide 58398F 3.INSTALL NO. 1 FLOOR UNDER COVER (w/ No. 1 Floor Under Cover)