Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for HV Model) › from 2020.05
RM3620E _58 Vehicle Interior _076130 HEATING / AIR CONDITIONING _0370842 AIR CONDITIONING SYSTEM(for HV Model) U

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for HV Model)  TERMINALS OF ECU  


AIR CONDITIONING AMPLIFIER ASSEMBLY


E407110C01
2.115,0.115 2.615,0.365 0.5,0.25 3.573,0.115 4.073,0.365 0.5,0.25 4.823,0.115 5.323,0.365 0.5,0.25 3.646,1.385 4.146,1.635 0.5,0.25 5.063,1.385 5.563,1.635 0.5,0.25 6.229,1.385 6.729,1.635 0.5,0.25 2.219,0.156 2.677,0.354 0.458,0.198 10 false G47 3.688,0.156 4.146,0.354 0.458,0.198 10 false G46 4.958,0.156 5.417,0.354 0.458,0.198 10 false z11 6.354,1.427 6.813,1.625 0.458,0.198 10 false z11 5.167,1.427 5.625,1.625 0.458,0.198 10 false G46 3.76,1.427 4.219,1.625 0.458,0.198 10 false G47 0.073,0.052 0.531,0.25 0.458,0.198 10 false *A 0.104,1.385 0.563,1.583 0.458,0.198 10 false *B
*A w/o Front Seat Heater System *B w/ Front Seat Heater System


a.

Disconnect the G46 air conditioning amplifier assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
G46-5 (B) - Body ground G - Body ground Power source (Back-up) Power switch off 11 to 14 V
G46-6 (IG+) - Body ground GR - Body ground Power source (IG) Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
G46-17 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω


c.

Reconnect the G46 air conditioning amplifier assembly connector.


d.

Measure the voltage, resistance and pulse according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
G47-1 (TAM) - G47-14 (SG-2) R - R*1
R - GR*2
Ambient temperature sensor signal
·

Power switch on (IG) (do not start the engine and electric motor)

·

Ambient temperature: 25°C (77°F)


1.05 to 1.45 V
·

Power switch on (IG) (do not start the engine and electric motor)

·

Ambient temperature: 40°C (104°F)


0.64 to 0.87 V
G47-3 (SG-1) - Body ground G - Body ground Ground for sensor Always Below 1 Ω
G47-5 (TR) - Body ground GR - Body ground Room temperature sensor signal
·

Power switch on (IG)

·

Cabin temperature: 25°C (77°F)


1.05 to 1.45 V
·

Power switch on (IG)

·

Cabin temperature: 40°C (104°F)


0.64 to 0.87 V
G47-6 (PRE) - G47-15 (SG-4) GR - L Air conditioner pressure sensor signal
·

Power switch on (READY)

·

Air conditioning system operating

·

Refrigerant pressure: Normal pressure (below 3025 kPa [30.8 kgf/cm2, 439 psi] and higher than 176 kPa [1.8 kgf/cm2, 26 psi])


0.74 to 4.61 V
·

Power switch on (READY)

·

Air conditioning system operating

·

Refrigerant pressure: Abnormal pressure (less than 176 kPa (1.8 kgf/cm2, 26 psi))


Below 0.74 V
·

Power switch on (READY)

·

Air conditioning system operating

·

Refrigerant pressure: Abnormal pressure (more than 3025 kPa (30.8 kgf/cm2, 439 psi))


4.61 V or higher
G47-11 (S5-3) - Body ground L - Body ground Power source of sensor Power switch off → on (IG) Below 1 V → 4.75 to 5.25 V
G47-14 (SG-2) - Body ground R - Body ground*1
GR - Body ground*2
Ground for sensor Always Below 1 Ω
G47-15 (SG-4) - Body ground L - Body ground Ground for sensor Always Below 1 Ω
G46-4 (CANL) - CAN communication line - -
G46-5 (CANH) - CAN communication line - -
G46-7 (LIN1) - Body ground BE - Body ground LIN communication signal Power switch on (IG) Pulse generation
(See waveform 1)
G46-11 (ECOS) - Body ground W - Body ground Integration control and panel assembly (ECO switch) signal
·

Power switch on (IG)

·

Integration control and panel assembly (ECO switch) Off → On


11 to 14 V → Below 1 V
G46-21 (BLW) - Body ground Y - Body ground Blower motor speed control signal
·

Power switch on (IG)

·

Blower switch: LO


Pulse generation
(See waveform 2)
z11-2 (BUS G) - Body ground - Ground for BUS IC Always Below 1 Ω
z11-3 (BUS) - z11-2 (BUS G) - BUS IC control signal Power switch on (IG) Pulse generation
(See waveform 3)
z11-4 (B BUS) - z11-2 (BUS G) - Power supply for BUS IC Power switch off 11 to 14 V
z11-5 (SGA) - Body ground - Ground for No. 1 cooler thermistor Always Below 1 Ω
z11-6 (TEA) - z11-5 (SGA) - No. 1 cooler thermistor signal
·

Power switch on (IG)

·

Evaporator temperature: 0°C (32°F)


1.7 to 2.1 V
·

Power switch on (IG)

·

Evaporator temperature: 15°C (59°F)


0.9 to 1.3 V

*1: for LHD

*2: for RHD



e.
E334619E01
0.292,1.552 0.75,1.75 0.458,0.198 10 false GND

Waveform 1:

Item Content
Terminal No. G46-7 (LIN1) - Body ground
Tool Setting 2 V/DIV., 20 μs./DIV.
Vehicle Condition Power switch on (IG)


f.
E349844E01
2.792,1.656 3.135,1.865 0.344,0.208 10 false GND

Waveform 2:

Item Content
Terminal No. G46-21(BLW) - Body ground
Tool Setting 1 V/DIV., 500 μs./DIV.
Vehicle Condition
·

Power switch on (IG)

·

Blower switch: LO




g.
E202803E08
0.313,1.448 0.729,1.646 0.417,0.198 10 false GND

Waveform 3:

Item Content
Terminal No. z11-3 (BUS) - z11-2 (BUS G)
Tool Setting 2 V/DIV., 20 μs./DIV.
Vehicle Condition Power switch on (IG)



AIR CONDITIONING CONTROL ASSEMBLY


E389743E02
3.354,0.167 3.854,0.417 0.5,0.25 3.479,0.208 3.938,0.406 0.458,0.198 10 false G24

a.

Disconnect the G24 air conditioning control assembly connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
G24-13 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G24-9 (IG+) - Body ground LA-B - Body ground Power source (IG) Power switch off Below 1 V
Power switch on (IG) 11 to 14 V


c.

Reconnect the G24 air conditioning control assembly connector.


d.

Check for waveform according to the value(s) in the table below.

Terminal No.
(Symbol)
Wiring Color Terminal Description Condition Specified Condition
G24-7 (LIN1) - Body ground LG - Body ground LIN communication Power switch on (IG) Pulse generation
(See waveform 1)


e.
E334619E01
0.292,1.552 0.75,1.75 0.458,0.198 10 false GND

Waveform 1:

Item Content
Terminal No. G24-7 (LIN1) - Body ground
Tool Setting 2 V/DIV., 20 μs./DIV.
Vehicle Condition Power switch on (IG)




MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>TERMINALS OF ECU