Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM (for eCall) › from 2020.08
RM3620E _56 Audio / Visual / Telematics _076049 TELEMATICS _0372098 TELEMATICS SYSTEM(for eCall) J

TELEMATICS  TELEMATICS SYSTEM(for eCall)  Warning Notification Function Malfunction  


PROCEDURE

1.CHECK PROBLEM SYMPTOM (WARNING NOTIFICATION FUNCTION)
a.

Check the problem symptom.

i.

Check the problem symptom of the warning notification function.

Result:
Result Proceed to
The multi-display screen does not show a warning message even though a warning light turns on or the multi-information display indicates a warning. A
The multi-display screen shows a warning message even though a warning light is not on and the multi-information display does not indicate a warning. B
The multi-display screen shows a warning message different from the warning light or the multi-information display.


HINT:
·

The warning notification function sends information to the service center through communication.

·

Carefully confirm the conditions that caused the malfunction in order to determine if a temporary problem with the radio wave signal conditions caused the malfunction.






A

2.INSPECT WARNING LIGHT

B

7.CHECK METER WARNING LIGHT
2.INSPECT WARNING LIGHT
a.

Check if the indicated warning light or message is listed in the following table.

HINT:

Only messages listed in the table are included in the warning notification function.


for HV Model:
Warning Name
Engine warning
Hybrid control system warning
Hybrid control system warning 2
Brake system warning
VSC warning
ABS warning
ECB warning
EPS warning
Charging system warning
Airbag warning
PCS warning
Cruise warning
TOYOTA parking assist-sensor system warning
Drive start control system
Brake override system warning
Smart key system warning
AFS warning
Automatic high beam system warning
LED headlight warning
Dynamic torque control AWD system warning
Tire pressure system warning
Electric parking brake warning
Auto hold warning
BSM system warning
Parking support brake system warning
Secondary collision brake warning
Vehicle proximity notification system warning
Engine maintenance warning
GPF system warning
LTA system warning
RSA system warning
RCTA warning
ASL system warning
Engine oil level warning
Brake fluid warning
Engine oil pressure warning
Tire pressure low warning
Washer fluid level warning
Hybrid battery diagnostic request warning
High coolant temperature warning
Hybrid system temperature warning
Hybrid battery cooling fan maintenance warning
Towing prohibited warning

for Gasoline Model:
Warning Name
Engine warning
Brake system warning
VSC warning
ABS warning
EPS warning
Charging system warning
Airbag warning
PCS warning
Cruise warning
TOYOTA parking assist-sensor system warning
Drive start control system
Brake override system warning
Smart key system warning
Grille shutter system warning
AFS warning
Automatic high beam system warning
LED headlight warning
Dynamic torque control AWD system warning
Tire pressure system warning
Electric parking brake warning
Auto hold warning
BSM system warning
LDA system warning
Stop and start system warning
Parking support brake system warning
Secondary collision brake warning
Engine maintenance warning
GPF system warning
LTA system warning
RSA system warning
RCTA warning
ASL system warning
Engine oil level warning
Brake fluid warning
Engine oil pressure warning
Tire pressure low warning
Washer fluid level warning
High coolant temperature warning

Result:
Result Proceed to
Warning light or message is listed in the table. A
Warning light or message is not listed in the table. B




A

3.CHECK CAN COMMUNICATION SYSTEM

B

END

3.CHECK CAN COMMUNICATION SYSTEM
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Bus Check.


e.

Check that all ECUs and sensors that use CAN communication are connected.

for HV Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>DIAGNOSIS SYSTEM

for Gasoline Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>DIAGNOSIS SYSTEM


Result:
Result Proceed to
There are no connection problems. A
There is a connection problem. B



A

4.CHECK METER WARNING LIGHT

B

4.CHECK METER WARNING LIGHT
a.

Check that the warning light of the combination meter assembly illuminates and a message displays on the multi-information display when there is a malfunction, and do not when there is not a malfunction.

OK:

There are no problems with warning lights or warning messages.


HINT:

The warning notification function of the telematics system uses the warning notification signals sent and received by the meter/gauge system. Therefore, if the meter/gauge system is not operating normally, the warning notification function will not operate normally.



Result:
Result Proceed to
OK (w/ Navigation System) A
OK (w/o Navigation System) B
NG C



A

5.CHECK NAVIGATION SYSTEM

B

6.CHECK AUDIO AND VISUAL SYSTEM

C

5.CHECK NAVIGATION SYSTEM
a.

Check if the navigation system is operating and functioning normally.

OK:

The navigation system is normal.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

6.CHECK AUDIO AND VISUAL SYSTEM
a.

Check if the audio and visual system is operating and functioning normally.

OK:

The audio and visual system is normal.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG

7.CHECK METER WARNING LIGHT
a.

Check that the warning light of the combination meter assembly illuminates and a message displays on the multi-information display when there is a malfunction, and do not when there is not a malfunction.

OK:

There are no problems with warning lights or warning messages.


HINT:

The warning notification function of the telematics system uses the warning notification signals sent and received by the meter/gauge system. Therefore, if the meter/gauge system is not operating normally, the warning notification function will not operate normally.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY

NG