TIRE PRESSURE WARNING SYSTEM > TC and CG Terminal Circuit |

| 1.CHECK HARNESS AND CONNECTOR (DLC3 - ECU AND BODY GROUND) |
Disconnect the H40 ECU connector.
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| H40-3 (TC) - H19-13 (TC) | Always | Below 1 Ω |
| H40-3 (TC) - Body ground | Always | 10 kΩ or higher |
| H19-4 (CG) - Body ground | Always | Below 1 Ω |
|
| ||||
| OK | ||
| ||