Home › General › MAINTENANCE › ENGINE

ENGINE > GENERAL MAINTENANCE


HINT:
Inspect these items on a cooled down engine.



1. INSPECT DRIVE BELT
Type
See procedures
2UZ-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


2. INSPECT SPARK PLUGS
Type
See procedures
2UZ-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


3. REPLACE ENGINE OIL AND OIL FILTER
Type
See procedures
2UZ-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


4. INSPECT ENGINE COOLANT
Type
See procedures
2UZ-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


5. REPLACE ENGINE COOLANT
Type
See procedures
2UZ-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


6. INSPECT EXHAUST PIPES AND MOUNTINGS
  1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.



7. INSPECT AIR CLEANER FILTER
  1. Remove the air cleaner filter.

  1. Visually check that the air cleaner filter is not excessively damaged or oily.

  1. Replace the air cleaner filter with a new one, if necessary.



8. INSPECT FUEL TANK CAP GASKET
Type
See procedures
2UZ-FE
Click here
3UR-FE
Click here
3UR-FBE
Click here


9. INSPECT FUEL LINES, FUEL LINE CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BAND
  1. Visually check the fuel lines and hoses for cracks, leakage, loose connections and deformation. Also, visually check the tank band for looseness.



10. INSPECT VALVE CLEARANCE
Type
See procedures
2UZ-FE
Click here