Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY

FRONT PASSENGER AIRBAG ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY


    B192374E01
  1. Connect the airbag connector to install the instrument panel wire.

    NOTICE:
    1. Match the color of the connector of the instrument panel wire assembly with that of the connector of the front passenger assembly and install the airbag connector.
    2. Lock the locking button securely.



    B192372
  1. Engage the 10 hooks and install the front passenger airbag on the instrument panel.

  1. Engage the 2 clamps.

  1. Install the 2 screws.



2. INSTALL NO. 1 HEATER TO REGISTER DUCT
  1. Install the duct with the 5 <G> or <H> screws.

  1. Attach the clamp.



3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY
  1. Install the instrument panel sub-assembly (Click here).



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



5. INSPECT SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).