WINDOW DEFOGGER SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
| |||||
| 3.CHECK LIN COMMUNICATION SYSTEM |
Check if the LIN communication system is functioning normally (Click here).
| Result | Proceed to |
| LIN communication system is normal | A |
| LIN communication system is not normal | B |
|
| ||||
| |||||
| 4.CHECK CAN COMMUNICATION SYSTEM |
Check if the CAN communication system is functioning normally (Click here ).
| Result | Proceed to |
| CAN communication system is normal | A |
| CAN communication system is not normal | B |
|
| ||||
| |||||
| 5.PROBLEM SYMPTOMS TABLE |
Refer to Problem Symptoms Table (Click here).
| Result | Proceed to |
| Fault is not listed in Problem Symptoms Table | A |
| Fault is listed in Problem Symptoms Table | B |
|
| ||||
| |||||
| 6.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Terminals of ECU (Click here).
Data List / Active Test (Click here).
Operation Check (Click here).
| |||||
| 7.REPAIR OR REPLACE |
| |||||
| 8.CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|