MULTI-MEDIA INTERFACE ECU > INSTALLATION |
| 1. INSTALL MULTI-DISPLAY CONTROLLER BRACKET A |
![]() |
Install the multi-display controller bracket A with the 2 bolts.
| 2. INSTALL MULTI-MEDIA INTERFACE ECU |
Connect the connector.
![]() |
Install the multi-media interface ECU with the nut.
| 3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY |
Install the instrument panel (Click here).
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).