Home › Audio/Visual/Telematics › AUDIO / VIDEO › SATELLITE RADIO ANTENNA

SATELLITE RADIO ANTENNA > INSTALLATION

for Preparation Click here



1. INSTALL SATELLITE RADIO ANTENNA ASSEMBLY


    B231078
  1. Attach the 2 claws to install the satellite radio antenna.

  1. Install the nut.

    Torque:
    4.5 N*m{ 45 kgf*cm , 39 in.*lbf }



  1. Attach the clamp.

    HINT:
    When installing a new satellite radio antenna, be sure to remove the white tape.



    B231079E01



2. INSTALL ROOF HEADLINING ASSEMBLY
  1. Install the roof headlining (Click here).



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).