VEHICLE STABILITY CONTROL SYSTEM > DIAGNOSIS SYSTEM |
| DIAGNOSIS |
![]() |
If the skid control ECU detects a malfunction, the ABS and brake warning lights and the slip indicator light come on and the VSC OFF indicator light blinks to warn the driver.
| WARNING LIGHT AND INDICATOR LIGHT BULB CHECK |
![]() |
Release the parking brake lever.
When the ignition switch is turned ON, check that the ABS and brake warning lights, and the VSC OFF and slip indicator lights come on for approximately 3 seconds.
| Trouble Area | See Procedure |
| ABS warning light circuit (Remains on) |
Click here
|
| ABS warning light circuit (Does not come on) |
Click here
|
| Brake warning light circuit (Remains on) |
Click here
|
| Brake warning light circuit (Does not come on) |
Click here
|
| VSC OFF indicator light circuit (Remains on) |
Click here
|
| VSC OFF indicator light circuit (Does not come on) |
Click here
|
| Slip indicator light circuit (Remains on) |
Click here
|
| Slip indicator light circuit (Does not come on) |
Click here
|