Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type)

DTC    62-41    Wrong Disc

DTC    62-42    Disc cannot be Read

DTC    63-41    Wrong Disc

DTC    63-42    Disc cannot be Read

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
62-41
An unsuitable CD is inserted.
  1. CD
  2. Radio receiver assembly
62-42
The disc cannot be read.
63-41
An unsuitable CD is inserted.
63-42
The disc cannot be read.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK CD


    I100152
  1. Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD.



NG
CHANGE CD
OK


2.CD CLEANING


    I100151
  1. CD cleaning

    1. If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.


NEXT


3.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


4.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
Go to step 5
OK

USE SIMULATION METHOD TO CHECK (Click here)  

5.REPLACE CD WITH ANOTHER AND RECHECK
  1. Replace the CD with another and recheck.

    1. Replace the CD with another normal one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END