Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type)

DTC    62-46    Scratched / Reversed Disc

DTC    63-46    Scratched / Reversed Disc

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
62-46
Scratches or dirt is found on CD surface or CD is inserted upside down.
  1. CD
  2. Radio receiver assembly
63-46
Scratches or dirt is found on CD surface or CD is inserted upside down.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.

1.CHECK THAT CD IS INSERTED PROPERLY
  1. Check whether or not the CD is inserted upside down.

    OK:
    CD is properly inserted.



NG
REINSERT CD PROPERLY
OK


2.CHECK CD


    I100152
  1. Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks on the CD.



NG
CHANGE CD
OK


3.DISC CLEANING


    I100151
  1. CD cleaning

    1. If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.


NEXT


4.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


5.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
Go to step 6
OK

USE SIMULATION METHOD TO CHECK (Click here)  

6.REINSERT CD PROPERLY
  1. Replace the CD with another and recheck.

    1. Replace the CD with another normal one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same trouble occurs again.

      OK:
      Malfunction disappears.



NG
REPLACE RADIO RECEIVER ASSEMBLY (Click here)
OK

END