SLIDING ROOF HOUSING > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE ROOF HEADLINING ASSEMBLY |
Remove the roof headlining (Click here).
| 3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH |
Remove the curtain shield airbag (Click here).
| 4. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH |
| 5. REMOVE SLIDING ROOF SIDE GARNISH RH |
![]() |
Disengage the 2 claws and the 3 guides, and remove the side garnish.
| 6. REMOVE SLIDING ROOF SIDE GARNISH LH |
| 7. REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY |
![]() |
Using a "TORX" socket wrench T25, remove the 4 bolts and glass.
| 8. REMOVE SLIDING ROOF WEATHERSTRIP |
![]() |
Remove the sliding roof weatherstrip.
| 9. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY |
Disconnect the 4 sliding roof drain hoses.
Remove the 10 bolts, 6 nuts and housing.
