FRONT PASSENGER AIRBAG ASSEMBLY > INSTALLATION |
| 1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY |
![]() |
Connect the airbag connector to install the instrument panel wire.
![]() |
Attach the 10 hooks and install the front passenger airbag on the instrument panel.
Attach the 2 clamps.
Install the 2 screws.
| 2. INSTALL NO. 1 HEATER TO REGISTER DUCT |
Install the duct with the 5 <G> screws.
Attach the clamp.

| 3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY |
Install the instrument panel sub-assembly (Click here).
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 5. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).