Home › Suspension › REAR SUSPENSION › REAR LOWER ARM (for No. 1 Arm)

REAR LOWER ARM (for No. 1 Arm) > INSTALLATION

for Preparation Click here



1. TEMPORARILY INSTALL NO. 1 REAR SUSPENSION ARM ASSEMBLY LH


C180772E03
  1. Align the matchmarks on the No. 1 rear suspension arm and adjusting cam.

  1. Temporarily install the No. 1 rear suspension arm with the 3 bolts and 3 nuts.



2. INSTALL REAR SHOCK ABSORBER ASSEMBLY LH
(Click here)


3. STABILIZE SUSPENSION
  1. Lower the vehicle.

  1. Press down on the vehicle several times to stabilize the suspension.



4. TIGHTEN NO. 1 REAR SUSPENSION ARM ASSEMBLY LH


C180772E01
  1. Tighten the 3 bolts and 3 nuts.

    Torque:
    for nut A:
    250 N*m{ 2549 kgf*cm , 185 ft.*lbf }
    for nut B:
    187 N*m{ 1907 kgf*cm , 137 ft.*lbf }
    for nut C:
    253 N*m{ 2580 kgf*cm , 187 ft.*lbf }



5. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
(Click here)