Home › Engine / Hybrid System › 3UR-FBE ENGINE CONTROL › MASS AIR FLOW METER
RM27L0U _51 Engine / Hybrid System _049293 3UR-FBE ENGINE CONTROL _0235521 MASS AIR FLOW METER G

3UR-FBE ENGINE CONTROL  MASS AIR FLOW METER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22204 1.CHECK MASS AIR FLOW METER

a.

Check the mass air flow value.

i.

Connect the Techstream to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Techstream main switch on.


iv.

Enter the following menus: Powertrain / Engine / Data List / All Data / MAF.


v.
A165593E01
0.96,1.424 1.179,1.588 0.219,0.164 10 Air

Blow air into the MAF meter, and check that the MAF value fluctuates.

If the result is not as specified, check the MAF meter (See page Engine / Hybrid System>3UR-FBE ENGINE CONTROL>MASS AIR FLOW METER>INSPECTION), or wiring and ECM (See page Engine / Hybrid System>3UR-FBE ENGINE CONTROL>SFI SYSTEM>P0102).